Quinten Posted June 5 Posted June 5 On 01/06/2025 at 14:38, Quinten said: Punctured my sump with 12 days to go for my trip to France Now fixed and back on the car! Warmed the car up and just checked for drips and so far dry. This bodes well 🏎️ 5 Quote
Flying Carrot Steve Posted June 6 Posted June 6 13 hours ago, Quinten said: Now fixed and back on the car! Warmed the car up and just checked for drips and so far dry. This bodes well 🏎️ If that's a standard thin steel sump, whoever welded it did a good job, they are not easy to weld at all 1 Quote
Flying Carrot Steve Posted June 7 Posted June 7 4 hours ago, Ansoeb said: Some under the hood bling added today. Before and After Are they not both the same picture just inverted? Quote
Craigieboy Posted June 8 Posted June 8 10 minutes ago, heawooi said: Who knew... Land Rovers tast good! I think it might be a write off. Quote
Flying Carrot Steve Posted June 8 Posted June 8 16 minutes ago, Craigieboy said: I think it might be a write off. Looks more like a bite-off.... groan. I'll get my coat..... 4 Quote
joolz Posted June 11 Posted June 11 metering out my omex loom in the sunshine ready for the swap over to emerald k6plus 2 Quote
Naranja_Al Posted June 11 Posted June 11 1 hour ago, joolz said: metering out my omex loom in the sunshine ready for the swap over to emerald k6plus Out of interest what’s the reason for the switch @joolz? Quote
joolz Posted June 11 Posted June 11 4 minutes ago, Naranja_Al said: Out of interest what’s the reason for the switch @joolz? It's an old omex500, so the K6plus gives me more features, nicer mapping (well I know the software better anyway) , adaptive (self learning) fuelling, and future proofing it for the next round of tuning upgrades. Plus I'm an emerald dealer so it doesn't seem fair to have my cars on anything else. my road westy is on MBE so that will get changed over at some point too. 3 Quote
Flying Carrot Steve Posted June 11 Posted June 11 1 hour ago, joolz said: metering out my omex loom in the sunshine ready for the swap over to emerald k6plus What exactly does 'metering out' involve @joolz? Quote
joolz Posted June 11 Posted June 11 9 minutes ago, Flying Carrot Steve said: What exactly does 'metering out' involve @joolz? tracing each circuit wiring (using AVO meter) so i can do an adaptor loom to mate the emerald to the existing omex plug, saves me making a complete new loom. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.