Robin Parker (Red Spider) - Yorkshire AO Posted April 13 Posted April 13 16 minutes ago, Buzzz said: Changed the bonnet latches to nice shiny new black ones. Satisfying result for an all yellow / black car. Just have to work out now how to get the rivet bodies out from inside the tub / trim gap as will probably rattle about. Done a similar thing. 1 Quote
mega ade Posted April 13 Posted April 13 I think nearly every Westfield on the road has a few rivet heads either in chassis tubing or between fiberglass and alloy and both in my case they don't really rattle around . 1 Quote
SteveB21 Posted April 13 Posted April 13 3 hours ago, Buzzz said: Changed the bonnet latches to nice shiny new black ones. Satisfying result for an all yellow / black car. Just have to work out now how to get the rivet bodies out from inside the tub / trim gap as will probably rattle about. Did the same on my orange car - amazing how such a small change can make such a big difference to the look. I was also worried about the rivet bodies rattling - but I can't hear anything over the noise of the ITBs and exhaust.... Quote
Ian Kinder (Bagpuss) - Joint Peak District AO Posted April 13 Posted April 13 1 minute ago, SteveB21 said: Did the same on my orange car - amazing how such a small change can make such a big difference to the look. I was also worried about the rivet bodies rattling - but I can't hear anything over the noise of the ITBs and exhaust.... Just squirt in plenty of Dinitrol or similar cavity wax and that should quieten them down! 1 Quote
SteveB21 Posted April 13 Posted April 13 1 hour ago, Ian Kinder (Bagpuss) - Joint Peak District AO said: Just squirt in plenty of Dinitrol or similar cavity wax and that should quieten them down! Now you mention it I think I may have done just that! Quote
dvd8n Posted 1 hour ago Posted 1 hour ago Had to move my work bench from the shed into the garage as the shed is in the process of falling down. The garage has no power and it's a bit dingy. I was going to buy some Ryobi work lights but they seem expensive and weren't really what I wanted so I knocked my own up from a Ryobi battery adaptor, a buck converter and some led strip: David Quote
snakey22 Posted 3 minutes ago Posted 3 minutes ago Fuel tank modifications to move the filler neck out the top and plate over so very suspect workman ship from previous owners Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.