Sharing what you’ve just done. Not questions. No comments required.

[Robin Parker (Red Spider) - Yorkshire AO]

16 minutes ago, Buzzz said:

Changed the bonnet latches to nice shiny new black ones. Satisfying result for an all yellow / black car. 
 

Just have to work out now how to get the rivet bodies out from inside the tub / trim gap as will probably rattle about. 

 

Done a similar thing. 

[mega ade]

I think nearly every Westfield on the road has a few rivet heads either in chassis tubing or between fiberglass and alloy and both in my case they don't really rattle around .

[SteveB21]

3 hours ago, Buzzz said:

Changed the bonnet latches to nice shiny new black ones. Satisfying result for an all yellow / black car. 
 

Just have to work out now how to get the rivet bodies out from inside the tub / trim gap as will probably rattle about. 

 

Did the same on my orange car - amazing how such a small change can make such a big difference to the look. I was also worried about the rivet bodies rattling - but I can't hear anything over the noise of the ITBs and exhaust....

[Ian Kinder (Bagpuss) - Joint Peak District AO]

1 minute ago, SteveB21 said:

 

Did the same on my orange car - amazing how such a small change can make such a big difference to the look. I was also worried about the rivet bodies rattling - but I can't hear anything over the noise of the ITBs and exhaust....

 

Just squirt in plenty of Dinitrol or similar cavity wax and that should quieten them down!

[SteveB21]

1 hour ago, Ian Kinder (Bagpuss) - Joint Peak District AO said:

Just squirt in plenty of Dinitrol or similar cavity wax and that should quieten them down!

Now you mention it I think I may have done just that!