Flying Carrot Steve Posted September 25 Posted September 25 24 minutes ago, Jaime Ward said: Winter projects underway, she will be rolling out next year with a new carbon bonnet 😎 Are you making it yourself then? will look forward to seeing the finished item. And your price list 😂 1 Quote
Jaime Ward Posted September 25 Posted September 25 1 hour ago, Flying Carrot Steve said: Are you making it yourself then? will look forward to seeing the finished item. And your price list 😂 Making it myself, squared up the bonnet as best as possible to make it a bit straighter and made the gaps more uniform, so hopefully the carbon one will fit loads better! Should lose a couple KG's as well!! Just have to decide on what weave orientation I want to have next, and make the plugs for the vents. Might make myself a couple bonnets for fun, but have no intention currently on producing many. Might put the mould up for sale after I have had my fun though! 3 Quote
Insuranceman Posted October 3 Posted October 3 2nd MOT passed at Stablers Garage. Just need some new rose joints for the ARB’s. 4 Quote
Jaime Ward Posted Monday at 17:58 Posted Monday at 17:58 Engine and gearbox out! Was planning on leaving the engine in, but needed a few mm extra to for the gearbox to clear the clutch plate. In the end I pulled it all out. Not the easiest on your own with a trolley jack but got there in the end! Committed now to a full chassis refresh, fix some rust, have a few extra bars welded in, etc etc etcccccccc.... And get rid of the rats nest thats the wiring loom. The list continues to grow!! 5 Quote
eggontoast Posted Monday at 18:16 Posted Monday at 18:16 On 04/10/2025 at 16:06, DannyTGS said: Progress on making my trailer Westfield suitable That a bmx jump ramp hanging off the wall, @DannyTGS?! Quote
DannyTGS Posted Monday at 21:42 Posted Monday at 21:42 3 hours ago, eggontoast said: That a bmx jump ramp hanging off the wall, @DannyTGS?! It is yes, but it’s for my RC cars lol 1 Quote
Insuranceman Posted Tuesday at 15:58 Posted Tuesday at 15:58 Making a desk that is 142 cm wide fit into an alcove that is 137 cm wide. 5 Quote
Naranja_Al Posted 5 hours ago Posted 5 hours ago Removed the expansion bottle from my Raceline water rail setup and replaced it with a proper header tank system. 6 Quote
Flying Carrot Steve Posted 4 hours ago Posted 4 hours ago I've seen the term 'water rail' quite a lot on here recently, I've no idea what that is though or what it does, why it's better etc. Anyone like to explain in simple terms please? Quote
Kit Car Electronics and Essex AO Posted 4 hours ago Posted 4 hours ago It neatens up the top hose plumbing bringing it to the front of the engine, and replaces the original plastic thermostat housing which can become brittle with age and crack. Looks pretty, too! 1 1 Quote
Rob Hunter - Club Secretary Posted 3 hours ago Posted 3 hours ago 49 minutes ago, Flying Carrot Steve said: I've seen the term 'water rail' quite a lot on here recently, I've no idea what that is though or what it does, why it's better etc. Anyone like to explain in simple terms please? The water rail modification on the zetec, essentially removes the long "hockey stick" 90 degree hose from the thermostat housing on back of the engine (in rear wheel drive applications) to the radiator in the nose. The Zetec plastic thermostat housing is a bit fragile (becomes brittle with repeated heat cycles) and replacements are hard to find so its a common modification. Here's a water rail from Burtons 1 Quote
Rob Hunter - Club Secretary Posted 3 hours ago Posted 3 hours ago 1 minute ago, Kit Car Electronics and Essex AO said: It neatens up the top hose plumbing bringing it to the front of the engine, and replaces the original plastic thermostat housing which can become brittle with age and crack. Looks pretty, too! Beat me to it! 😂 2 Quote
Insuranceman Posted 3 hours ago Posted 3 hours ago 23 minutes ago, Rob Hunter - Club Secretary said: The water rail modification on the zetec, essentially removes the long "hockey stick" 90 degree hose from the thermostat housing on back of the engine (in rear wheel drive applications) to the radiator in the nose. The Zetec plastic thermostat housing is a bit fragile (becomes brittle with repeated heat cycles) and replacements are hard to find so its a common modification. Here's a water rail from Burtons Would this fit a zetec black top? 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.