Matt_S Posted January 8, 2023 Share Posted January 8, 2023 Radiator brackets made from 1.5mm stainless steel, made to replace the standard aluminium ones due to the fatigue issue with them. Fit and forget! Mounting holes left off so can be fitted to suit your hole pattern. 2 Link to comment Share on other sites More sharing options...
Nic Chase (NICO) - Shropshire & Mid-Wales AO Posted January 8, 2023 Share Posted January 8, 2023 Hi Matt I will take a pair. PM me details. Link to comment Share on other sites More sharing options...
Matt_S Posted January 8, 2023 Author Share Posted January 8, 2023 PM’d @Nic Chase (NICO) - Shropshire & Mid-Wales AO Link to comment Share on other sites More sharing options...
Gary Taylor Posted January 8, 2023 Share Posted January 8, 2023 Hi @Matt_S I’ll take a pair please but will need them posting up north , will drop a pm to you vheers Gary Link to comment Share on other sites More sharing options...
Matt_S Posted January 8, 2023 Author Share Posted January 8, 2023 PM’d you @Gary Taylor 👍🏼 Link to comment Share on other sites More sharing options...
RJRWesty Posted January 8, 2023 Share Posted January 8, 2023 Pm sent Link to comment Share on other sites More sharing options...
Matt_S Posted January 8, 2023 Author Share Posted January 8, 2023 PM’d @RJRWesty 👍🏼 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted January 8, 2023 Share Posted January 8, 2023 If you currently have the folded aluminium top brackets and have any plans to put either a 75mm core radiator and high power fan on, or a 55 rad/intercooler/high power fan set up, I'd say these were near vital. I went through about three sets of alloy brackets in a month or so, with the weight of the 75mm rad and fan just continually cracking the alloy brackets. 2 Link to comment Share on other sites More sharing options...
Yorkshire_Pudding Posted January 8, 2023 Share Posted January 8, 2023 PM sent Link to comment Share on other sites More sharing options...
Matt_S Posted January 8, 2023 Author Share Posted January 8, 2023 PM’d @Yorkshire_Pudding 👍🏼 Link to comment Share on other sites More sharing options...
Gary Taylor Posted January 10, 2023 Share Posted January 10, 2023 Absolutely spot on @Matt_S brackets arrived today, many thanks 👍 2 Link to comment Share on other sites More sharing options...
Nic Chase (NICO) - Shropshire & Mid-Wales AO Posted January 10, 2023 Share Posted January 10, 2023 Arrived today. Thanks. Very nice brackets. 2 Link to comment Share on other sites More sharing options...
RJRWesty Posted January 10, 2023 Share Posted January 10, 2023 Arrived today, cheers 2 Link to comment Share on other sites More sharing options...
Naranja_Al Posted April 12 Share Posted April 12 Have you got any of these left? I’ve just noticed one of my aluminium top brackets has sheared….🙄 Link to comment Share on other sites More sharing options...
Matt_S Posted May 16 Author Share Posted May 16 Hi all, I have a few pairs of these available again if anybody is after some. Same as before, made from 1.5mm stainless steel to replace the aluminium ones with the mounting holes left off. They are £28.50 per pair + postage or I can bring them with me to the National Kit Car show at Malvern 👍🏼 Cheers Matt Link to comment Share on other sites More sharing options...
Recommended Posts