Two7 Posted November 9, 2022 Share Posted November 9, 2022 Since I discovered the factory put the LH thread nut and stub shaft on drivers side rear hub and RH thread nut and stub shaft on passenger side rear hub, I have been trying to swap them around, but I can't find any suitable nuts given the Westfield parts shop is no more. I believe they are M22 1.5 nyloc nuts with 41 mm AF , does anybody know where you can get them ? Febi produce what they say is suitable for all sierra's but it says they are M27 2 41 AF clearly that diameter is too big. Kit car direct etc don't have any Sierra M22 in stock , is there any other supplier out there who might have them ? Link to comment Share on other sites More sharing options...
John Hoyle Posted November 9, 2022 Share Posted November 9, 2022 Hi ,Sierra rear drive shaft 41mm nuts are available on eBay [genuine ford ones ],I think its ok to re use as required ,a small amount of thread lock ,torqued up correctly and a paint mark on them to check they are still tight after use. Link to comment Share on other sites More sharing options...
evosteve Posted November 9, 2022 Share Posted November 9, 2022 Seen these on ebay a bit pricey! id 234742107433 Link to comment Share on other sites More sharing options...
Steve20 Posted November 9, 2022 Share Posted November 9, 2022 https://www.ebay.co.uk/itm/234742107433?hash=item36a7b84d29:g:GEQAAOSw1GtcjSm3&amdata=enc%3AAQAHAAAAoFjkZ0hyOOO%2F1trtrHRYHOHE%2ByDiUSwzFw%2Bh8VeUPpPpmTPZSivxEyFTp07XBHxvcvjiPVEI%2FrfVz6aslYTprIbQjd%2BQesM92bPSpB1efEwn5GM6UdC5L5jHQdS4axr67Dr6u7k2gALqZliNPmvzqER5Y0oUKpzQrex7Y5l7oENYauql8VhmLv4t5bcEG5Ssaa%2Fgoizt59ZrY%2BHzh8Gsdg4%3D|tkp%3ABk9SR-yEo-iLYQ I bought mine from this guy, all good! Link to comment Share on other sites More sharing options...
CarbonWest - Chris Broster - Bristol & Bath AO Posted November 10, 2022 Share Posted November 10, 2022 @Rednop1 @Kingster any ideas as I also need x 2 (1 x LH and 1 x RH) Link to comment Share on other sites More sharing options...
Kingster Posted November 10, 2022 Share Posted November 10, 2022 4 minutes ago, Chris Broster - Bristol & Bath AO said: @Rednop1 @Kingster any ideas as I also need x 2 (1 x LH and 1 x RH) Got mine off eBay a while back Link to comment Share on other sites More sharing options...
CarbonWest - Chris Broster - Bristol & Bath AO Posted November 10, 2022 Share Posted November 10, 2022 Thanks Chris @Kingster - gone with the ones @Steve20 recommended as need for next weekend. Link to comment Share on other sites More sharing options...
Two7 Posted November 10, 2022 Author Share Posted November 10, 2022 Thanks @Steve20I saw these but wasn't sure they were big enough, are they 41mm across the flats ? Link to comment Share on other sites More sharing options...
Kingster Posted November 10, 2022 Share Posted November 10, 2022 From memory there’s two sizes - I know I once ordered some that were too big for mine, but I have push-in shafts not lobro. Link to comment Share on other sites More sharing options...
Two7 Posted November 10, 2022 Author Share Posted November 10, 2022 Thanks guys. I have the ebay ones on standby. Just placed an order for a pair from GBS( people who make the ZERO) they claim they are identical to westfield parts and £10 cheaper than ebay. I will keep you posted if they are any good. 2 Link to comment Share on other sites More sharing options...
Steve20 Posted November 10, 2022 Share Posted November 10, 2022 My shafts are with Lobro joints and nuts are 41mm across flats 👍 1 Link to comment Share on other sites More sharing options...
Recommended Posts