Jump to content

Cortina front hubs with vented 247mm disk and m16 calipers


mikey p

Recommended Posts

Full set up for front corners. I ran these for years and were amazing on track with a light fast road pad (I used M1144). Never over heated them and they had superb stopping power. I stupidly 'upgraded' and have never had the same confidence as this original set up.

 

Cortina uprights good condition, driver side has one of the small backing plate holes drilled out for a m12 speed sensor. £100

 

Cortina front hubs, bearing are all ok and genuine ford items will need a clean and check. £50

 

247mm capri front disks have a small lip but less than half worn. 19.6mm £20

 

M16 calipers good working order, spaced for the vented disks. Come with some braided brake lines which are serviceable.

Can come with some standard QH pads. £75

 

Almost brand new Q&H cortina track rod ends. Did around 500miles if that. £10

 

Happy to do the lot as a deal. They are just missing the caliper to hub bolts and locking tabs. A fit and forget set up.

 

Can give to a courier if you arrange.

20220811_143006.jpg

20220811_143026.jpg

Link to comment
Share on other sites

  • 1 month later...
  • 1 year later...

Still got these for sale.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.