Growling Posted June 2, 2021 Posted June 2, 2021 (edited) Hello all 👍 I’ve just jumped into Westfield ownership with with an R1 engined Megablade. great fun until a water hard pipe rusted through. Doh! I’d like to send the previous owner who built the car a message to ask about the part I require, but I can’t seem to send him a private message on here? Or anyone for that matter. could someone let me know how to do it? Here’s the Westfield!: Edited June 2, 2021 by Growling 1 Quote
Weekend Warrior Posted June 2, 2021 Posted June 2, 2021 You have to be a fully paid up member to send a private message ,for the small fee you will get more advice than you know what to do with 😁. Nice car by the way 👍 1 Quote
Growling Posted June 2, 2021 Author Posted June 2, 2021 Ahh I see. That makes sense. Thanks a lot 😃 Quote
Gary Taylor Posted June 3, 2021 Posted June 3, 2021 Welcome, car looks lovely and hope your sorted out and back up and running asap Quote
Chris Broster Posted June 3, 2021 Posted June 3, 2021 Welcome Mr G, Cracking looking car and just in time for the good weather, whereabouts are you so we can put you in touch with your local members. If you post a picture of the engine bay and also the part then I'm sure someone on here can help - there is LOADS of knowledge buried in here! Chris Quote
Growling Posted June 3, 2021 Author Posted June 3, 2021 2 hours ago, Chris Broster - Bristol & Bath AO said: Welcome Mr G, Cracking looking car and just in time for the good weather, whereabouts are you so we can put you in touch with your local members. If you post a picture of the engine bay and also the part then I'm sure someone on here can help - there is LOADS of knowledge buried in here! Chris Thanks Chris! I’m from St. Ives, Huntingdonshire. I have the 2007 R1 (4C8) engine. I have just found this coolant pipe is corroded and I need a replacement. However, on removal it looks as if mine might be a custom part.. 🤷🏼♂️. I presume to suit the car application. As you can see my pipe bends the opposite way to the correct part, and the little pipe is bent on mine. Is this an off the shelf conversion pipe for BEC applications does anyone know? Any info greatly appreciated. Quote
Gary Taylor Posted June 3, 2021 Posted June 3, 2021 A quick look finds this , is it the same ? Might narrow the search on what to ask for at a dealers/ bike breakers https://www.ebay.co.uk/itm/192257707843 failing that it may be easier and quicker to cut off the corroded part and get a new piece welded on 1 Quote
Growling Posted June 3, 2021 Author Posted June 3, 2021 1 hour ago, Gary Taylor said: A quick look finds this , is it the same ? Might narrow the search on what to ask for at a dealers/ bike breakers https://www.ebay.co.uk/itm/192257707843 failing that it may be easier and quicker to cut off the corroded part and get a new piece welded on Thanks Gary, that’s very helpful! Thanks. That does look the same. Interesting as that’s a 2003 part and my engine is a 2007. might be a little harder to track down as it looks like they’ve discontinued it. 1 Quote
Weekend Warrior Posted June 3, 2021 Posted June 3, 2021 41 minutes ago, Growling said: Thanks Gary, that’s very helpful! Thanks. That does look the same. Interesting as that’s a 2003 part and my engine is a 2007. might be a little harder to track down as it looks like they’ve discontinued it. As well as here try , Kit Car Blats and Midlands Kit Cars Owners Group both on Facebook ,there’s a Couple of Bike engined cars out your way I believe .👍 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.