Jitterbug Posted May 21, 2021 Share Posted May 21, 2021 Pair or Westfield NOS driveshaft assembly units left and right. I believe these are Sierra push in style. I bought them from a guy who had them as spares for racing. Some light surface rust and marks from storage - see pictures. The part numbers read; DL1214 1700043980 and DL1213 1700043363 3213088 Located in Bristol looking for £300 I can post via courier for £20 if it helps. Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 21, 2021 Share Posted May 21, 2021 3 hours ago, Jitterbug said: I believe these are Sierra push in style No, these look to have Lobro joints on, so are the bolt in types, as used with the Sierra (viscous) LSD etc. They've got the outer stub shafts bolted on, from the look of it, which may be where the confusion has arisen? Link to comment Share on other sites More sharing options...
Jitterbug Posted May 21, 2021 Author Share Posted May 21, 2021 51 minutes ago, Dave Eastwood (Gadgetman) - Club Secretary said: No, these look to have Lobro joints on, so are the bolt in types, as used with the Sierra (viscous) LSD etc. They've got the outer stub shafts bolted on, from the look of it, which may be where the confusion has arisen? Thanks Dave, I was debating whether or not to put the advert in the technical section first to identify them. Fingers crossed they are useful for someone. Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 21, 2021 Share Posted May 21, 2021 The stub axles are around £200 on their own, to buy new, so this is a good buy for the complete package! Link to comment Share on other sites More sharing options...
NigelO Posted May 22, 2021 Share Posted May 22, 2021 @Dave Eastwood (Gadgetman) - Club Secretary - do you happen to know if all Sierra SDV driveshafts are the same length? I believe my car is a “extra-wide” as it copes with the driveshafts from the XR4i Link to comment Share on other sites More sharing options...
Kingster Posted May 22, 2021 Share Posted May 22, 2021 1 hour ago, NigelO said: Sierra SDV driveshafts The advertised shafts will not suit a Sierra SDV (that has SDV uprights). The SDV uses (by design) standard Sierra driveshafts - not the shorter ones used in a modular Westfield build. Link to comment Share on other sites More sharing options...
NigelO Posted May 22, 2021 Share Posted May 22, 2021 thanks Chris, although I'm confused now... My existing driveshafts have a Westfield sticker on them, so presumably not OE Sierra Link to comment Share on other sites More sharing options...
Steve20 Posted May 22, 2021 Share Posted May 22, 2021 If it helps I have just converted from Sierra SDV to standard SEi rear and still have the old Ford shafts in my garage, could measure tomorrow and give comparative dimensions. Steve Link to comment Share on other sites More sharing options...
NigelO Posted May 22, 2021 Share Posted May 22, 2021 Just measured my shafts - they are approx 225mm between the tips of each CV boot Link to comment Share on other sites More sharing options...
Jitterbug Posted May 23, 2021 Author Share Posted May 23, 2021 Interesting chat gents, does anybody want to buy them? 😂 1 Link to comment Share on other sites More sharing options...
gazzwesty1 Posted May 26, 2021 Share Posted May 26, 2021 PM sent for drive shafts Link to comment Share on other sites More sharing options...
Jitterbug Posted June 2, 2021 Author Share Posted June 2, 2021 Still available Link to comment Share on other sites More sharing options...
NigelO Posted June 3, 2021 Share Posted June 3, 2021 Could you please measure between the CV boots? I might be interested, but obviously only if they fit! Link to comment Share on other sites More sharing options...
Jitterbug Posted June 4, 2021 Author Share Posted June 4, 2021 18 hours ago, NigelO said: Could you please measure between the CV boots? I might be interested, but obviously only if they fit! Measuring between the inner faces with them straightened out. I make the longer one around 370mm and the shorter one around 340mm. Thanks Link to comment Share on other sites More sharing options...
NigelO Posted June 4, 2021 Share Posted June 4, 2021 Thanks for checking - just as well you did - my driveshafts are about 380mm and 410mm respectively Link to comment Share on other sites More sharing options...
Recommended Posts