Jump to content

TD Pro-race 1.2 7x13,with R888R's*Sold*


CosKev

Recommended Posts

Set of four in Anthracite,pics will follow but they are in as new condition.

 

4x108 Ford

 

Front tyres R888R 185/60 13's,

Rear tyres R888R 205/60 13's.

Tyres are 2015 year of manufacture ,tread depth basically as new.

 

ET15.

 

£600 collected from SY11 Shropshire. 

Link to comment
Share on other sites

  • CosKev changed the title to TD Pro-race 1.2 7x13,with R888R's
25 minutes ago, Kent Westfield said:

What PCD are they on ?

 

Sorry 4x108 Ford

Link to comment
Share on other sites

Chaps,

I am interested in these wheels - but could do with a bit of guidance. My main purpose of changing is to fill the rear wheel arches as the current wheels sit inboard and look hideous.

 

I am on 15x6.5J ET: 0 mm.  195/50 R15 Tyres.

The above Rear: 13x7J ET: 15mm ( I assume this is +ve offset). Tyres:  205 /60 R13.

 

Plugging these numbers into the calculator throws out the results below.  So just for my clarity, the 'Poke' is reduced from 82.6 to 73.9 mm.

 

Does this mean that the wheels will sit more inboard (by 8.7mm) than my old wheels? Or is the notation the opposite? 

Or should I be looking at the inset? The wheels above have a 21.6mm larger inset, does this mean the wheels are pushed outboard by this much?

 

Kev,

Sorry to hijack your add. If the geometry works correctly - I am interested in these.

Thanks

 

Wheels.png

Link to comment
Share on other sites

Will they fit has a visual indication - looks like you cut that bit off in the screen grab?

Link to comment
Share on other sites

21 minutes ago, Kent Westfield said:

Does this mean that the wheels will sit more inboard (by 8.7mm) than my old wheels

 

Yeah,if you are certain your wheels are ET0?🤔

 

Got pics of the car?

 

Unless you've got massive rear arches ET0 wheels shouldn't be too far in the arches🤷🏾‍♂️

Link to comment
Share on other sites

As Kev says et0 should fill the arches?

 

also the figures don’t look quite right (diameter?)  this is what I see...

image.jpg
 

image.jpg

 

  • Like 1
Link to comment
Share on other sites

Photos below. Believe it or not, the car is already fitted with spacers.

 

It is a wide body so wheel arches are wider ?

 

I measured from the back face of the wheel mounting hub to the front and this was coming to 82.5mm.
 

I did this with the spare wheel by placing it face down, and measuring the depth from the mounting face to the ground. 

 

With a 6.5 wheel width, I am calculating the ET at 2.5mm ish. In reality I think that 2.5mm is the tyre wall.

 

Something does not quite stack up ?

5EBD1739-A4FE-43DB-9D69-DCACA1F168EF.jpeg

C02460D0-CFA5-489D-A12A-8B11099DFF67.jpeg

83E42702-56A9-4537-B7DA-355600319A40.jpeg

Link to comment
Share on other sites

Et0 wheels will almost certainly have a “dish” - they don’t. Look like typical et35 wheels to me. 

  • Like 1
Link to comment
Share on other sites

3 minutes ago, Chris King - Webmaster said:

Et0 wheels will almost certainly have a “dish” - they don’t. Look like typical et35 wheels to me. 

I’m struggling with the calculations. The wheel does not have the ET marked.

 

Some more photos 

FD6EABB6-8F20-4B56-AC49-3224BDBDDCC4.jpeg

2907F10A-1104-4628-8153-818CCB50EEDD.jpeg

Link to comment
Share on other sites

  • CosKev changed the title to TD Pro-race 1.2 7x13,with R888R's*Sold*
×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.