Kingster Posted September 20, 2020 Posted September 20, 2020 Anyone got one for a Brian James (micro max) trailer? I guess other makes could be adapted. Must be high level as the trailer is only ickle
Gary Taylor Posted September 21, 2020 Posted September 21, 2020 There’s a couple on eBay but there way down south
Kingster Posted September 21, 2020 Author Posted September 21, 2020 29 minutes ago, Gary Taylor - Scotland AO said: There’s a couple on eBay but there way down south Yeah too far and too expensive I think the same ones have been on there for months - don’t mind paying up to £200. 1
Simon Waterfall Syman84 Posted September 21, 2020 Posted September 21, 2020 chris you have the same trailer as me so that standard Brian James one doesn't fit its a different size. i found out the hard way
Kingster Posted September 21, 2020 Author Posted September 21, 2020 20 minutes ago, syman84 said: chris you have the same trailer as me so that standard Brian James one doesn't fit its a different size. i found out the hard way Thanks for the info Simon 👍 Have you got one now?
Kingster Posted September 21, 2020 Author Posted September 21, 2020 Winter project. Learn to use the MIG I have in the garage and make one 😁 2
neptune Posted September 21, 2020 Posted September 21, 2020 Just be mindful especially if your trailer is single axle, most non 4 x4 tow bars have very limited nose weight limits. ( Mine are 80kg) Putting tyres Infront of the axle may overload your tow bar
Kingster Posted September 21, 2020 Author Posted September 21, 2020 1 hour ago, neptune said: Just be mindful especially if your trailer is single axle, most non 4 x4 tow bars have very limited nose weight limits. ( Mine are 80kg) Putting tyres Infront of the axle may overload your tow bar Yes - mines 75kg but figured I’d move the car back to compensate. Maybe an idea to test things first I guess!
neptune Posted September 21, 2020 Posted September 21, 2020 2 hours ago, Chris King - Webmaster said: Yes - mines 75kg but figured I’d move the car back to compensate. Maybe an idea to test things first I guess! Good idea. My trailers not long enough to have that option !!
Kingster Posted September 21, 2020 Author Posted September 21, 2020 Mine has a little leeway - but not much... so will likely make a rack that sits nearer the axle than the BJ ones. Should be room over the long bonnet.
Simon Waterfall Syman84 Posted September 22, 2020 Posted September 22, 2020 3 hours ago, Ben(EBD-ENG) said: this is also going to be my winter project well voluntold @RussH wants one as well so you might as well whip 4 up mate
TAFKARM Posted September 22, 2020 Posted September 22, 2020 I’m trying to blag one that’s hidden behind a tonne of compost
BenD Posted September 22, 2020 Posted September 22, 2020 you can or could buy pre bent bars from tube bender on ebay for the rack
Recommended Posts