BigSkyBrad Posted March 20, 2019 Posted March 20, 2019 Mine's been a Magnusson 94-piece socket set I got nine years ago, and still available from Screwfix for £49.99. It's been through all sorts of projects and I haven't pampered it - there's not the replacement guarantee like more expensive brands, but i haven't broken anything yet either! Quote
BenD Posted March 20, 2019 Posted March 20, 2019 mine is a 12inch 3/8 drive breaker bar. its just the right length to get inside most wheel arches for brakes and other stuff. it was about 15 quid from a local tool shop. i wouldnt leave home without it Quote
tc3nitro Posted March 20, 2019 Posted March 20, 2019 I have a pair of knipex side cutters that I bought many many years ago, these things have been through thick and thin. Abused and used to cut all manner of things and yet they still perform faultlessly. Quote
stephenh Posted March 20, 2019 Posted March 20, 2019 1 hour ago, Archibald Meatpants said: Rivnut tool Plus 1. Before I had my first Westfield I didn't even know what a rivnut was, let alone a tool to fix them. In fact, I hadn't even heard of a rivnut. Quote
Marcus Barlow - Show and Events Co-ordinator Posted March 20, 2019 Posted March 20, 2019 2 minutes ago, stephenh said: Plus 1. Before I had my first Westfield I didn't even know what a rivnut was, let alone a tool to fix them. In fact, I hadn't even heard of a rivnut. +2 Quote
NickBW Posted March 20, 2019 Posted March 20, 2019 Removing RivNuts though are a pain in the butt.. Other than getting the grinde rout, any tools out there to do it? Quote
SootySport Posted March 20, 2019 Posted March 20, 2019 Drill it out like you would an ordinary rivet. Quote
Mark (smokey mow) Posted March 20, 2019 Posted March 20, 2019 Mines the vice brake, it makes bending small metal parts so much easier. 6 Quote
neptune Posted March 20, 2019 Posted March 20, 2019 2 hours ago, NickBW said: Removing RivNuts though are a pain in the butt.. Other than getting the grinde rout, any tools out there to do it? A Sharp chisel works a treat. Quote
BigSkyBrad Posted March 20, 2019 Author Posted March 20, 2019 @Mark (smokey mow) Oooo, I like that vise brake! Quote
Thrustyjust Posted March 20, 2019 Posted March 20, 2019 Air compressor .......................... won on ebay for £40 ................. so in budget . Had it 15 years , was 10 years old when I got it. Change the oil twice a year, one start capacitor from work bin in that time and still sounds sweet . Quote
Lyonspride Posted March 21, 2019 Posted March 21, 2019 18 hours ago, Mark (smokey mow) said: Mines the vice brake, it makes bending small metal parts so much easier. I was about to say exactly the same! Combine this with my 300mm shear press and a pile of scrap aluminium, I can fabricate almost everything I ever need for most projects. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.