Jonk179 Posted June 14, 2018 Posted June 14, 2018 Hello all, Does anyone have the part numbers ( Quinten Hazel etc )for SEW front top and bottom suspension ball joints? If not part numbers what the original fitment was? Cortina, Escort, Sierra etc? Thanks Quote
Rusty Nuts Posted June 15, 2018 Posted June 15, 2018 Top ball joints Quinton Hazel QD1117RHT Bottom Ball Joint Quinton Hazel QSJ663S Quote
Robin Parker (Red Spider) - Yorkshire AO Posted June 15, 2018 Posted June 15, 2018 5 hours ago, Rusty Nuts said: Top ball joints Quinton Hazel QD1117RHT Bottom Ball Joint Quinton Hazel QSJ663S They're the same as I used. The track rod ends are Mk 3, 4, 5 Cortina, FTR4040, if you need those. Quote
Paul Aspden Posted June 15, 2018 Posted June 15, 2018 They are a ford transit drag link with right hand thread....don't ask what age transit, I have no idea! Quote
WINGNUT Posted June 15, 2018 Posted June 15, 2018 @Jonk179 I've recently replaced my top ball joints courtesy of help by @Robin (Red Spider) - Yorkshire AO and the numbers he's given are correct. Track rods are for cortinas mentioned and the upper ball joints fit standard and wide track Westfield front suspension wishbones. I quoted the part number given for upper ball joints and my supplier mustn't have been able to obtain so supplied frontline FTR4701 these are also good for the job too. Can't help with lowers as never changed yet but will watch these posts for all options. Scott 1 Quote
Jonk179 Posted June 15, 2018 Author Posted June 15, 2018 Di knew you knowledgeable folks would see me right. I'm going to order these on Monday. Looking to rebush all the suspension at the same time and fit new shocks and springs. Any advice about which suspension bushes to go for? Also SEW front/rear shock lenghths and Spring pound ages. CVH engine and passenger and I quite like pies! Quote
Robin Parker (Red Spider) - Yorkshire AO Posted June 15, 2018 Posted June 15, 2018 If you need steering rack gaiters, I used SRG047 and SRG200. I had to get 2 sets as they were different side to side. Quote
Jonk179 Posted June 15, 2018 Author Posted June 15, 2018 Thanks Robin I will probably change the gaiters at the same time as the cost is minimal. Have you changed your suspension bushes? Quote
Robin Parker (Red Spider) - Yorkshire AO Posted June 15, 2018 Posted June 15, 2018 1 hour ago, Jonk179 said: Thanks Robin I will probably change the gaiters at the same time as the cost is minimal. Have you changed your suspension bushes? No, just the joints, but I might be able to help you out. I'll check tomorrow. Quote
Robin Parker (Red Spider) - Yorkshire AO Posted June 16, 2018 Posted June 16, 2018 11 hours ago, Jonk179 said: Thanks Robin I will probably change the gaiters at the same time as the cost is minimal. Have you changed your suspension bushes? I'm not sure as I didn't change mine, but I was told that the bushes are Hillman Avenger outer track control bushes, QHY 976. Can anyone confirm? Quote
jimthedrummer Posted July 23, 2018 Posted July 23, 2018 Evening, Can any of you helpful chaps confirm that the codes quoted are also correct for a 92 SE narrow? Quote
Robin Parker (Red Spider) - Yorkshire AO Posted July 23, 2018 Posted July 23, 2018 The numbers I put up are correct for my 1991 registered car. Quote
Rusty Nuts Posted July 23, 2018 Posted July 23, 2018 Here is an old but very helpful resource here Quote
GaryH Posted July 26, 2018 Posted July 26, 2018 A while ago a few of us contributed to a slightly updated parts list: Gary Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.