November 4th at Cadwell Trackday

[Andrew]

I felt a bit sorry for MG guy, survived all the bad conditions to then stuff it in the eleventh hour!

[BenD]

i never actually seen what happend to the mg just when it came back into the pits

[Andrew]

8 minutes ago, bunje said:

i never actually seen what happend to the mg just when it came back into the pits

I imagine he lost it at the gooseneck and clattered into the Armco. You can see the car on the left just before Mansfield on Russ's vid. Last lap obviously.. 

[Howsafe Workwear and Safety Equipment]

18 hours ago, Andrew said:

I think this was my second run after lunch. Too dry for my wet tyres.. Spotted the Cleggster up ahead so couldn't resist the chase.  Camera died just as I caught up. Tbf I think I only did another lap before deciding to go in and swap tyres.

 

 

glad you was at least having to try a little to catch me

[Kingster]

A see a pattern here of people posting “pass the Kingster” videos 

[Andrew]

48 minutes ago, Chris King - Webmaster and Joint North East AO said:

A see a pattern here of people posting “pass the Kingster” videos 

It's a variation on a "spotted" thread. 

[Andrew]

55 minutes ago, Howsafe Workwear and Safety Equipment said:

 

glad you was at least having to try a little to catch me

I think I've all but killed one of my wet tyres doing it. Wish I'd been braver and swapped tyres sooner. 

[Howsafe Workwear and Safety Equipment]

wish I had of taken some wet tyres - probably wouldnt have had that oops moment

[GaryR1983]

On 06/11/2017 at 17:10, Sycho said:

I seem to have deleted all my videos

At lest there's no evidence now of my spin
 

Some nice video's from all

Did you have any issues with the Cadwell noise meters?
 

[BenD]

cadwell is a static noise test once youve passed that your good to go

[GaryR1983]

Ah, That makes things a little bit easier. Hopefully I'll be rebuilt for the next one there.

[Andy (Sycho)]

49 minutes ago, GaryR1983 said:

Some nice video's from all

Did you have any issues with the Cadwell noise meters?
 

Fairly easy at Caldwell, they asked what the max rpm was which I said 8500rpm to which they asked if I was sure it was!

Told me to rev it to 6000 odd rpm which I don't think I got to before they said ok & it only read 94db, static was 106db I think.

So not a proplem, I think it's the itb's will drive by that causes the problem.

[TAFKARM]

My duratec on throttle bodies and with half the exhaust packing blown out registered 95db. 

Again just told me to take it to 3/4 max revs - I sandbagged and noise tested at 4.5 when it should really have been 5.5. 

[TAFKARM]

Everyones favourite Dangler.

 

 

[B.RAD]

Why was the jamsport guy an issue? Haven't watched the video, just interested...