Tim Reid Posted July 8, 2017 Share Posted July 8, 2017 I'm going from carbs to injection so either need a swirl pot or tank with a return inlet. I also need a return fuel line from the engine to tank. Link to comment Share on other sites More sharing options...
Davidjohnson Posted July 14, 2017 Share Posted July 14, 2017 I have a swirl post and lift pump £30 collected from leeds Pump is new and tank was used for a track day while my tank was being built 1 Link to comment Share on other sites More sharing options...
Kingster Posted July 14, 2017 Share Posted July 14, 2017 Assaargh! Just spent loads more three days ago. Oh well .... Link to comment Share on other sites More sharing options...
Yanto Posted July 15, 2017 Share Posted July 15, 2017 8 hours ago, Davidjohnson said: I have a swirl post and lift pump £30 collected from leeds Pump is new and tank was used for a track day while my tank was being built If Tim doesn't have these I would be willing to buy them and can pick up/ pay cash on Wednesday 19th as I'm in the Leeds area. Ian 1 Link to comment Share on other sites More sharing options...
Kingster Posted July 15, 2017 Share Posted July 15, 2017 On 08/07/2017 at 19:29, Tim (TimDave25) - Joint Thames Valley AO said: I'm going from carbs to injection so either need a swirl pot or tank with a return inlet. I also need a return fuel line from the engine to tank. @Tim (TimDave25) - Joint Thames Valley AO, you can use a "dead head" set up with fuel reg and return in the back - and then you only have one line to the engine bay. Here's my set up with a set of bike TB's and rail - as I already had twin lines, I used them, but no need. This was pre swirl pot of course. Link to comment Share on other sites More sharing options...
Tim Reid Posted July 15, 2017 Author Share Posted July 15, 2017 Thanks all, I have messaged David as I'm interested in the swirl pot but already have my carb pump that I could use as a lifter pump. @Yanto if David doesn't want to split or post than you can have them. I also now have the option so add a sump to my current tank as I have found a local person to help weld. Link to comment Share on other sites More sharing options...
Davidjohnson Posted July 15, 2017 Share Posted July 15, 2017 I don't mind splitting Link to comment Share on other sites More sharing options...
Yanto Posted July 16, 2017 Share Posted July 16, 2017 i have a suitable pump, i was only interested in the swirl pot for a potential future upgrade, I don't "need" as such. Ian Link to comment Share on other sites More sharing options...
Arm Posted July 16, 2017 Share Posted July 16, 2017 Ive got a fuel tank ready to have the collector pot welded on the bottom thus no separate swirl pot and lifter pump required. Link to comment Share on other sites More sharing options...
Tim Reid Posted July 16, 2017 Author Share Posted July 16, 2017 17 minutes ago, Arm said: Ive got a fuel tank ready to have the collector pot welded on the bottom thus no separate swirl pot and lifter pump required. That's something I'm considering if David's pot is suitable to cut and weld to the bottom of my existing tank it will give me what I'm looking for with the additional takeoff and baffeling (by having only a couple of holes from the main tank into the sump). Link to comment Share on other sites More sharing options...
Arm Posted July 16, 2017 Share Posted July 16, 2017 That was my plan then went hillclimbing so only needed a 4 L fuel tank. My tank is cheap at £50 with the sump tank made and ready to weld on . Link to comment Share on other sites More sharing options...
Recommended Posts