JulianE Posted May 17, 2017 Posted May 17, 2017 Wide Rac rollbar used condition rear uprights have some slight marks and have been repowdercoated I should have most if not all of the rosejoints (new) bolts and spacers . Not legal for racing now of course but much safer than the standard hoop . £85 posted SOLD Tech craft mega flow silencer, used condition does have a slight dent that has been straightened nicely intake pipe has been rewelded at some point. Bargain at £60 SOLD Standard Ford alloy Zetec sump suitable for shortening comes with splashguard , rare to find now £50 posted May be a slight delay in postage due to volume of parts being cleared out
Mauro Posted May 18, 2017 Posted May 18, 2017 Hello Julian, Looking for a silencer. What size is ? inlet size, muffler diameter, muffler lenght ? Is it repackable ? Thanks, Mauro
JulianE Posted May 18, 2017 Author Posted May 18, 2017 I'll put sizes up tonight @Mauro I was a bit rushed last night
JulianE Posted May 19, 2017 Author Posted May 19, 2017 @Mauro yes silencer can be taken apart and repacked . End to end is 890mm , silencer sleeve is 650mm and is approximately 6" diameter . Intake pipe is 64mm but an adapter could be probably made easily enough by an exhaust supplier
Kingster Posted May 21, 2017 Posted May 21, 2017 4 minutes ago, dhutch said: Is that a silvertop sump or blacktop? Silvertop 1
fossett Posted May 22, 2017 Posted May 22, 2017 FWIW the silvertop sump pits the blacktop just fine (using a silvertop rubber gasket)
Kingster Posted May 22, 2017 Posted May 22, 2017 Yep my blacktop uses my old Scholar silvertop sump. Just had to use the windage tray that was on the Silvertop. (Which is in the picture too)
JulianE Posted May 24, 2017 Author Posted May 24, 2017 I still have it but subject to posting to Italy if it does not go you will have second dibs @AllanI
robwalker1 Posted June 26, 2017 Posted June 26, 2017 Hi, Is the RAC roll bar still available? Thanks, Rob
JulianE Posted June 26, 2017 Author Posted June 26, 2017 Yes @robwalker1 still available , I have found all the bolts and rose joints , just needs two spacers inside the rosejoints , I can probably find where to get them very easily online.
Dave Eastwood (Gadgetman) - Club Chairman Posted June 26, 2017 Posted June 26, 2017 McGill Motorsport does a variety of spacers, they may do them? 1
Recommended Posts