Which Steering Wheel

[Kevin (Mr T)]

I can imagine this one has been done to death, but I will plough on regardless......

 

Luke has my steering column to weld up a Rapfix QR boss (well I think he does, but that's another story!).

 

Are there any steering wheels that have the three hole 50.8 PCD pattern on them and if there are, recommendations?

 

Thanks and any links to previous threads on this would be welcome.

[SootySport]

You need a non-drilled wheel and drill the holes yourself.     There maybe some 3 hole ones for sale, someone else may know later.

[Andy (Sycho)]

There's some here:

http://www.demon-tweeks.co.uk/motorsport/steering-wheels?refine=fixing%20method:undrilled%20formula%2Fsingle%20seater

Or couldn't you use one of these:

http://www.demon-tweeks.co.uk/search/3%20hole%20steering%20wheel

[Kevin (Mr T)]

You need a non-drilled wheel and drill the holes yourself.     There maybe some 3 hole ones for sale, someone else may know later.

If I drilled it myself, I would probably end up with six holes before I got it right!

[Kevin (Mr T)]

There's some here:

http://www.demon-tweeks.co.uk/motorsport/steering-wheels?refine=fixing%20method:undrilled%20formula%2Fsingle%20seater

Or couldn't you use one of these:

http://www.demon-tweeks.co.uk/search/3%20hole%20steering%20wheel

Thanks and I quite like the look of the Sparco 260 with the flat bottom. Doesn't have the PCD on the spec as far as I can see.

 

For some reason, the second link doesn't work.

[Andy (Sycho)]

Mm it worked for me, try this

http://www.demon-tweeks.co.uk/motorsport/steering-wheel-bosses-accessories/momo-3-to-6-hole-steering-wheel-adaptor

[Kit Car Electronics]

If I drilled it myself, I would probably end up with six holes before I got it right!

 

It's easy, Kev - I'll do it for you if you think you'd dangler it up

[Kevin (Mr T)]

It's easy, Kev - I'll do it for you if you think you'd dangler it up

Easy? Have you got a pillar drill tucked away in your workshop?

[Kevin (Mr T)]

Mm it worked for me, try this

http://www.demon-tweeks.co.uk/motorsport/steering-wheel-bosses-accessories/momo-3-to-6-hole-steering-wheel-adaptor

Ah, the adapter. Did think about that and my local engineering company could probably knock one up for me.

 

Would rather do without if I can.

 

Thanks again for the advice.

[Kit Car Electronics]

Easy? Have you got a pillar drill tucked away in your workshop?

 

yes, but a steady hand drill and a centre-punch is enough if you're good

[Kevin (Mr T)]

yes, but a steady hand drill and a centre-punch is enough if you're good

PMSL steady and hand drill are three words I have NEVER linked together!

[Marcus Barlow - Show and Events Co-ordinator]

got this one on mine, cheapest decent quality new suede one I could find, drilled it myself for the qr boss, centre punched though a cad template 

 

http://www.europaspares.com/volanti-range-260mm-suede-flat-solid-centre-steering-wheel.html

[SootySport]

Thanks and I quite like the look of the Sparco 260 with the flat bottom. Doesn't have the PCD on the spec as far as I can see.

 

For some reason, the second link doesn't work.

That will be PCD you are looking for.     A 260mm wheel ??    That's very small, you sure?

[Marcus Barlow - Show and Events Co-ordinator]

got this one on mine, cheapest decent quality new suede one I could find, drilled it myself for the qr boss, centre punched though a cad template 

 

http://www.europaspares.com/volanti-range-260mm-suede-flat-solid-centre-steering-wheel.html

 

 

ps this one is still good for seeing dials though, some wheels can obscure so be careful 

[Dave Eastwood (Gadgetman) - Club Chairman]

That will be PCD you are looking for.     A 260mm wheel ??    That's very small, you sure?

Aye, 260mm is tiny. I've only met one or two drivers that like wheels that small on a Westfield.