Zetec Exhaust Headers & Silencer - SOLD

[Terryathome]

Zetec full exhaust system. Headers are OK but the standard silencer is a bit past it's sell by date (well I think so as it rattles with rust inside it) anyway will chuck that in for free. You could cut the end off it and renew whatever and re-pack it? Just a note, have passed trackday noise test with it so it may not be that bad.

 

I have the aluminium heat-shield for it but needs one of the welds re doing where the jubilee clips goes to fasten it to the silencer.  

 

The headers are the standard Westfield 4 into 1 and will fit 1.8 Silvertop and 2.0 Blacktop engines as I have fitted then to the engines listed. It also has tapping for sensor.

 

All the above for £100 collection only or WSCC courier

 

Pic here https://lh3.googleusercontent.com/m6lZ4qCI3LK55DzW3OyQSfW3Fu2WYjAREqpjXJ0GjzpKQ6mJ4md8twISy5IgJo3yAYaF8Jl4T_S6-h1KvhnRB3P1cBkq9JwIQjzzKYC_dCrVyWBeGg6LQmX7WvcGKMu483PjJDFiJ6Vz0XZpDachtAus9RH2FX2axHZiPeaRtNDkAf9HZa9YU2X6Nny4IxdFz4X44Xbhlsfw7Q6Ril8HW4LMKNNVQLZTCNfXTfZ1NpeMi6234b7tMRi0yubaUM_2uoQbBfQ4_vo-McHcnK2OqGByrDFlC735KYBRgRzFAyUxLNaEW5oqB1TjuH2OXYMUYbbdsOAhl50RXWUPFZH2nvyqbyBSfWRkpJhLwYqIZHyAezzu1UxgVJRAXu-BZCeNRbdDUdusG2we44oRGCG6SoVPkr6JiwaSO2FZPFhkyyZiBxb8BN4I6_vwPehiacnFnJWC-jm7L9uhcPzOV4-vFoUgnyGV-IIljrMHswZYE0Qvf_587K9mKH0KuLdz2agXCsAaPaPvgH8GUaECppZ416tBH5AklvqJFefkX6Uoi9eN1MuiNub7xTZ3rTb4znkzmndi=w1586-h892-no

 

 

Terry