carbon-nv Posted August 10, 2015 Share Posted August 10, 2015 Hi All As promised, please find below a small list of parts currently available for sale: Two pairs of 'aero+' cycle wings (up to 205 tyres) - £170 per pair plus £12 p&p One pair of half doors (suitable for Widebody but will fit Narrow with some trimming) - £170 plus £12 p&p - SOLD SUBJECT TO PAYMENT One Narrow dashboard blank - £120 plus £12 p&p - SOLD SUBJECT TO PAYMENT Two 'double bubble aeroscreens - One is in plain weave and the other in twill weave - TWILL WEAVE ONE SOLD SUBJECT TO PAYMENT Both of these are available for £90 plus £12 p&p (usually £120) owing to the fact that the plain weave one was the first out of the new mould and I've since decided to opt for a slightly heavier backing layer on subsequent screens. It is perfectly strong and light, but thought people would appreciate a slightly heavier feel on future parts The twill weave screen has a slight weave pull visible approx. 5cm up from the bottom and about 20cm left of centre. The visible effect is of a patch approx. 10mm square that looks darker than the surrounding fabric. I've tried my best to capture it in the linked picture below: https://www.dropbox.com/s/8juct9vhfgygqs3/20150807_150508.jpg?dl=0 Please PM me if you'd like any of these parts and I'll check back in the morning to confirm to those expressing a definite interest first. Apologies to be operating a 'first dibs' system on the early run of parts, but I'm hopeful of being able to move to a more straightforward 'on demand' way of working very soon, when I've gotten a few tooling and admin jobs out of the way. I know already that there are quite a few parts that people would like to see available and I'll be working hard over the coming months to meet the demand, subject to sufficient interest in those, of course I have also got a limited stock of M5 X 25mm bighead fasteners available for £1.25 each to anyone buying wings/aeroscreens etc. and wanting to bond-in for a cleaner look. To help get the ball rolling, I will be offering members buying parts via the Boardroom a flat £10 off anything valued at over £100 and £5 off for anything less than that (excl. p&p). This offer excludes the aeroscreens listed above, however. Thanks for looking and examples of the parts currently for sale and those coming soon can be viewed via the attached link: https://www.dropbox.com/sh/5aace60eomcaccv/AABuxd7JKz3gCoGF8DxCic3Qa?dl=0 Cheers Mark Link to comment Share on other sites More sharing options...
Rich8977 Posted August 10, 2015 Share Posted August 10, 2015 Mark PM sent ref half doors Regards Rich Link to comment Share on other sites More sharing options...
KugaWestie Posted August 10, 2015 Share Posted August 10, 2015 Double bubble aeros - wide or narrow car? Link to comment Share on other sites More sharing options...
carbon-nv Posted August 11, 2015 Author Share Posted August 11, 2015 The aeroscreens are sized to fit a wide scuttle Gary. However, there is some flex in them and I've yet to try one against a Narrow scuttle So, if anyone buys one for Narrow fitment and it isn't possible to get a good fit, even with a little trimming, I'd offer a full refund plus return postage cost. I'd then look to re-model accordingly Link to comment Share on other sites More sharing options...
Rich8977 Posted August 11, 2015 Share Posted August 11, 2015 Mark PM sent ref payment for half doors Regards Rich Link to comment Share on other sites More sharing options...
Rich8977 Posted August 13, 2015 Share Posted August 13, 2015 Hi Mark Doors have arrived, nice finish, will try them for fit at the weekend Regards Rich Link to comment Share on other sites More sharing options...
Rusty Nuts Posted August 14, 2015 Share Posted August 14, 2015 Hello Mark would it be possible to make a boot box cover with an integrated rear panel finishing strip?? Regards Shindha Link to comment Share on other sites More sharing options...
drummerdrum_uk Posted August 15, 2015 Share Posted August 15, 2015 Dash has arrived yesterday been looking for one for a Narrow for a couple have months have to say the quality is exceptional!!! Thank you very much i can't wait to get it fitted Link to comment Share on other sites More sharing options...
carbon-nv Posted August 18, 2015 Author Share Posted August 18, 2015 Thank you gents Shindha - In theory, yes, a boot box cover could be made with an angled return at the leading edge. Fitting one around the roll bar feels like it might be tricky, however and I have a suspicion that you'd likely have to remove the roll bar completely to get everything to fit in place. Might be problematic if easy access to the diff area is desired? Not certain the type of roll-bar you've got, but have a look at it and PM me if it's something you think might work for you Regards Mark Link to comment Share on other sites More sharing options...
Sparkymart Posted August 18, 2015 Share Posted August 18, 2015 Mark Any plans yet for rear arch protectors? I'm really interested in a pair that follows the contours of the arch(like the ones carbon mods used to supply) rather than the plan flat panel style Cheers Martin Link to comment Share on other sites More sharing options...
carbon-nv Posted August 18, 2015 Author Share Posted August 18, 2015 Hi Martin I've just started to look at these and will try my best to cover the bases over the coming months. They're a tricky shape, so another part that really needs to be made in pre-preg fabric As you know, there are a few variants to consider also, so it will take a bit of time but they're fairly high on my 'to do' list Regards Mark Link to comment Share on other sites More sharing options...
Rusty Nuts Posted August 18, 2015 Share Posted August 18, 2015 Thank you gents Shindha - In theory, yes, a boot box cover could be made with an angled return at the leading edge. Fitting one around the roll bar feels like it might be tricky, however and I have a suspicion that you'd likely have to remove the roll bar completely to get everything to fit in place. Might be problematic if easy access to the diff area is desired? Not certain the type of roll-bar you've got, but have a look at it and PM me if it's something you think might work for you Regards Mark Hi Mark will PM you soon by the way I have a Caged cage. Shindha Link to comment Share on other sites More sharing options...
XTR2Turbo Posted September 17, 2015 Share Posted September 17, 2015 Picked some parts up this evening. Top quality and service. I didn't realise that Mark was made redundant last year and this is a Westfield owners hobby turned into a fulltime new start up business. I wish him well. David 1 Link to comment Share on other sites More sharing options...
pete g Posted September 17, 2015 Share Posted September 17, 2015 yes top quality items . good luck Link to comment Share on other sites More sharing options...
Steve243 Posted September 18, 2015 Share Posted September 18, 2015 Hi Mark If you still have a pair of the front cycle wings I will take them. Thanks Steve Link to comment Share on other sites More sharing options...
Recommended Posts