Chris Hooper Posted April 29, 2015 Author Share Posted April 29, 2015 AAMOI would it be easier to drop the whole rear subframe and word on the hubs off the car ? Quote Link to comment Share on other sites More sharing options...
BenD Posted April 30, 2015 Share Posted April 30, 2015 the rear lower wishbone bolt was worst for me. i forgot to undo my hub nuts before removing the whole rear end from the car i just cut through the wishbone with my angle grinder and then held the drivshaft in a vice warmed up the nut and with a long peice of scaffolding it came loose but it took me a long time to get them off. i didnt have any trouble with the fronts. the rear wishbone bolt i had to get the upright almost glowing red and hit it with a sledge hammer took be about 4 hours a side to get them out. not something id like to go through again if im honest Quote Link to comment Share on other sites More sharing options...
Mooch Posted April 30, 2015 Share Posted April 30, 2015 the rear wishbone bolt i had to get the upright almost glowing red and hit it with a sledge hammer took be about 4 hours a side to get them out. not something id like to go through again if im honest ^^^ Me too. Awful job! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.