Steve M Posted February 8, 2015 Share Posted February 8, 2015 I have 4 team dynamics pro race 2 15" wheels in very good condition, ( I'm changing to pro race 1.2's ) they are coming off my 2007 wide body Westfield, I'm not 100% on the offset, I'm hoping they will be marked on closer inspection, I expect those in the know will know the offset anyway, by knowing what they have come off These will be available in 3 - 4 weeks time (Wheels only, no tyres) I was thinking £160 collected or plus courier charge at cost Steve Now Sold Link to comment Share on other sites More sharing options...
wackydo Posted February 8, 2015 Share Posted February 8, 2015 Steve, how wide are these? If they are 6.5 or 7 I'm very interested. What's the difference with the pro race 1.2's, why are you changing ? Link to comment Share on other sites More sharing options...
wackydo Posted February 8, 2015 Share Posted February 8, 2015 Seems like 15 x 7 according to their web site, so that's good Link to comment Share on other sites More sharing options...
Tom Frankland (T3OMF) Posted February 8, 2015 Share Posted February 8, 2015 All the sizes etc will be stamped on the inside of the wheel Link to comment Share on other sites More sharing options...
Steve M Posted February 8, 2015 Author Share Posted February 8, 2015 All the sizes etc will be stamped on the inside of the wheel Ok, thanks Tom Link to comment Share on other sites More sharing options...
CosKev Posted February 8, 2015 Share Posted February 8, 2015 Team dynamics tend to etch the ET/sizes etc onto the inner rim, near where the tyre fits onto.Then they paint over the top of it! They don't stamp it clearly in the centre like most manufacturers. Link to comment Share on other sites More sharing options...
fossett Posted February 9, 2015 Share Posted February 9, 2015 PM Sent Link to comment Share on other sites More sharing options...
Steve M Posted February 9, 2015 Author Share Posted February 9, 2015 All pm's replied to Steve Link to comment Share on other sites More sharing options...
Steve M Posted February 9, 2015 Author Share Posted February 9, 2015 Link to comment Share on other sites More sharing options...
CosKev Posted February 9, 2015 Share Posted February 9, 2015 Taken a wheel off & nothing relating to the offset what so ever ! Just 7jx15 stamped on the outer rim Looks like I'm going to have to get my head around measuring the offset my self Strange,both my sets have the offset by the wheel size.might just be E38,not ET? Link to comment Share on other sites More sharing options...
wackydo Posted February 9, 2015 Share Posted February 9, 2015 Steve do you have a measurement of the backspace, ie the distance from the back line of the wheel to the back of the hub mounting plate. e.g. like this: These are interesting but also rather American. Here also: http://forum.jdmstyletuning.com/showthread.php?20793-How-To-Measure-OFFSET-on-your-Rims Link to comment Share on other sites More sharing options...
Steve M Posted February 9, 2015 Author Share Posted February 9, 2015 Link to comment Share on other sites More sharing options...
wackydo Posted February 9, 2015 Share Posted February 9, 2015 So, looking at my 15x7J team dynamics that look like this: The distance across the rim is 203mm, the backspace is 138mm So the offset is 138 - (203/2) = 36 ish The pro race 1.2s that you have come in offsets of e15 / 23 / 25 / 30. Looking inside my one show this: Which I think is then e35 shown just under the S157, though I'm not quite show why the 5 is on a slightly raised area. cheers Tony Link to comment Share on other sites More sharing options...
Steve M Posted February 11, 2015 Author Share Posted February 11, 2015 Now Sold Thanks Link to comment Share on other sites More sharing options...
Recommended Posts