alexander72 Posted November 13, 2014 Share Posted November 13, 2014 Mightyness is also measured in soul Reverend Terry... 1 Quote Link to comment Share on other sites More sharing options...
thinkturbo Posted November 13, 2014 Author Share Posted November 13, 2014 Ok, missus give the go ahead now, so this is my car spec, Rollbar standard, Oil catch tank 1 litre, Battery cut off on exterior of car, need sticker for on/off. 3 pt will ans harnesses, 1700 x flow mighty I hope, road registered. What more will I need to sort? Also need some gear to where?, where is the best to source this, as on a budget... Cheers Quote Link to comment Share on other sites More sharing options...
Terry Everall Posted November 13, 2014 Share Posted November 13, 2014 You need an MSA licence, helmet, gloves and overalls to MSA requirements. Most use race boots. I think you now need 4 point harnesses and you would need someone to look at your roll over bar and advise if its ok. Can you post a picture on here.Most of us have the battery cut off switch on the dash or tunnel so we can reach it. Any ignition switch must have an on/off sticker. You will also need to fabricate and attach a timing strut to the front of the car. Quote Link to comment Share on other sites More sharing options...
woodman Posted November 13, 2014 Share Posted November 13, 2014 You don't need a battery cut off , you only need sticker for ignition switch Quote Link to comment Share on other sites More sharing options...
Terry Everall Posted November 13, 2014 Share Posted November 13, 2014 But if you have a cut off switch fitted it must work and have a sticker Quote Link to comment Share on other sites More sharing options...
thinkturbo Posted November 13, 2014 Author Share Posted November 13, 2014 You need an MSA licence, helmet, gloves and overalls to MSA requirements. Most use race boots. I think you now need 4 point harnesses and you would need someone to look at your roll over bar and advise if its ok. Can you post a picture on here.Most of us have the battery cut off switch on the dash or tunnel so we can reach it. Any ignition switch must have an on/off sticker. You will also need to fabricate and attach a timing strut to the front of the car. It's in the members gallery think turbos sei Quote Link to comment Share on other sites More sharing options...
thinkturbo Posted November 13, 2014 Author Share Posted November 13, 2014 You need an MSA licence, helmet, gloves and overalls to MSA requirements. Most use race boots. I think you now need 4 point harnesses and you would need someone to look at your roll over bar and advise if its ok. Can you post a picture on here.Most of us have the battery cut off switch on the dash or tunnel so we can reach it. Any ignition switch must have an on/off sticker. You will also need to fabricate and attach a timing strut to the front of the car. Does anyone sell a timing strut?, I have ignition key to make live, then a push button start, as well as bat cut off Quote Link to comment Share on other sites More sharing options...
thinkturbo Posted November 13, 2014 Author Share Posted November 13, 2014 Only have 3 points on the chassis for my harnesses Quote Link to comment Share on other sites More sharing options...
Terry Everall Posted November 13, 2014 Share Posted November 13, 2014 You really need a proper MSA/RAC roll over bar for safety 1 Quote Link to comment Share on other sites More sharing options...
Marto303 Posted November 14, 2014 Share Posted November 14, 2014 As Terry says RAC roll bar as a minimum & 4 point harnesses "thinksafety" It doesn't happen often, but a few of us have rolled Westfields :blush: Speak to Luke at Plays-kool er www.plays-kool.co.uk he'll supply all your safety equipment at cracking prices Quote Link to comment Share on other sites More sharing options...
thinkturbo Posted November 14, 2014 Author Share Posted November 14, 2014 How do I fit 4 point harness when I only have 3 point fixings?, as there a special thread?. Also is it a SPEED category Non-race national B (not EU) license for £43? Quote Link to comment Share on other sites More sharing options...
FILFAN Posted November 14, 2014 Share Posted November 14, 2014 You can get weld on bushes with the correct thread. I got mine for £8 off eBay Quote Link to comment Share on other sites More sharing options...
FILFAN Posted November 14, 2014 Share Posted November 14, 2014 Yeah that's the correct licence. Make sure you get one for 2015 Quote Link to comment Share on other sites More sharing options...
FILFAN Posted November 14, 2014 Share Posted November 14, 2014 http://www.ebay.co.uk/itm/380466351512 I used these and cut them in 2 to get 4 mounts. Even cheaper now Quote Link to comment Share on other sites More sharing options...
thinkturbo Posted November 14, 2014 Author Share Posted November 14, 2014 Glad you said that, I was half way through completing the 2014 one!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.