B.RAD Posted August 9, 2014 Share Posted August 9, 2014 Howdy folks After being the lucky buyer of Dave Eastwood's XE engine, I'm after a few parts to complete the set and start the installation. The bits I need are as follows: Flywheel Clutch and clutch cover (for type 9) XE to type 9 bellhousing (either short or long input shaft version, vertical) Solid engine mounts Alternator (standard or lightweight, obviously lightweight preferred!) Exhaust manifold I'm open to pretty much anything at this point as I just want to get cracking with it, so please let me know if you have any suitable spares, whatever they may be! Thanks in advance Barny Link to comment Share on other sites More sharing options...
FILFAN Posted August 9, 2014 Share Posted August 9, 2014 Not forgot buddy. Will have a dig around tomorrow. Have got my old solid mounts too 1 Link to comment Share on other sites More sharing options...
B.RAD Posted August 9, 2014 Author Share Posted August 9, 2014 Cheers Phil Much appreciated mate. Link to comment Share on other sites More sharing options...
jim_l Posted August 11, 2014 Share Posted August 11, 2014 Your inbox appears to be full? I have a clutch plate and release fork. Think you require a sierra 2.3 diesel plate to go with it. I have an older heavy flywheel , you probably won't want to fit one of those. I also have a lighter flywheel but I think it is specific to the 5.5" clutch Let me know if you still need stuff and I'll see what else I have and take some pics today. Jim Link to comment Share on other sites More sharing options...
B.RAD Posted August 11, 2014 Author Share Posted August 11, 2014 Hi Jim Many thanks for the response! I've cleared out my inbox now I am still in need of a clutch and clutch plate (edit to add, also need everything else on the list too!) so certainly interested in anything you've got, please and thank you! I've sent you a PM. Thanks again Barny Link to comment Share on other sites More sharing options...
Recommended Posts