jezmilligan Posted February 18, 2003 Share Posted February 18, 2003 My catch tank consists of a small Castrol bottle zip-tied to my chassis. Will this do me for the speed series or will I need something a little more professional? Thanks Jez. Quote Link to comment Share on other sites More sharing options...
Blatman Posted February 18, 2003 Share Posted February 18, 2003 I reckon you'd be OK, BUT, if you are going to the expense of making all the necessary purchases for safety, entries, and possibly accommodation, it would be a shame to fail scrutineering (and therefore lose your entry money, etc) because you were too tight to spend 40 quid on a proper catch tank and some hosing............ Just my humble opinion, of course....... Quote Link to comment Share on other sites More sharing options...
BobM Posted February 18, 2003 Share Posted February 18, 2003 Where's the best place to get a 'proper' catch tank then Blatters? ISTR Rally Design being mentioned previously. Any other options? Demon Tweeks have one for £73 Quote Link to comment Share on other sites More sharing options...
Blatman Posted February 18, 2003 Share Posted February 18, 2003 Yep, Rally Design do seem to represent the best value for a new catch tank, IMO. Motorsport News (out tomorrow) may well be worth a look, particularly at the companies selling Escort/Sierra/General rally spares............ Quote Link to comment Share on other sites More sharing options...
scott beeland Posted February 18, 2003 Share Posted February 18, 2003 My 1 litre nasogastric feed bottle (!! will prob'ly get replaced by a sigg bottle b4 3 sisters (maybe!! Quote Link to comment Share on other sites More sharing options...
Blatman Posted February 18, 2003 Share Posted February 18, 2003 Are the Sigg bottles a min of 1 litre capacity? I realise I may be nitpicking, but so do some of the scrutineers........ Quote Link to comment Share on other sites More sharing options...
scott beeland Posted February 18, 2003 Share Posted February 18, 2003 The sigg I have is 1 litre. Whad'ya reckon?? Quote Link to comment Share on other sites More sharing options...
Blatman Posted February 18, 2003 Share Posted February 18, 2003 As I said further up the page........*should* be OK...........but I'm not offering any guarantees. The *only* guarantee is to fit a "proper" catch tank. A "proper" catch tank would be one that looks like it was designed and constructed to do the job in an autosport type application. A square/oblong tank, with welded inlets/outlets, (or maybe Goodridge type threaded fittings), and maybe a way of viewing the oil level, would get past a scrutineer. If he decided that a bottle designed to carry a drink on a bicycle/in a ruck sack isn't suitable, you're knackered............ I really can't understand the "What can I get away with" attitude when a definite answer exists, and is comparatively cheap to do.........*shrugs* Would you adopt the same cavalier attitude to buying a crash helmet? Probably not. If your oil catch tank is unsuitable/compromised, then in a worst case scenario, it will cause an accident, and may lead to a temporary closure of the circuit while they clear the oil up.......... Disclaimer. This is not a rant, just a strongly worded point of view............from some-one who has occasionally sufered at the hands of picky scrutineers........... Quote Link to comment Share on other sites More sharing options...
MIKEASHTON Posted February 25, 2003 Share Posted February 25, 2003 I used an aluminium water bottle for a push bike. 1 litre capacity, it's own mounting bracket, and a nipple to attached the hose too. All I did then was drill a second small 'breather' hole in the cap. Cost, less than a tenner. Quote Link to comment Share on other sites More sharing options...
RICHARD+PHILIP Posted February 25, 2003 Share Posted February 25, 2003 We've been using a castrol GTX bottle for the last 5 years with no problems from the scrutineers! An ally one would look better but it's heavier I like the water bottle idea! Quote Link to comment Share on other sites More sharing options...
scott beeland Posted February 25, 2003 Share Posted February 25, 2003 Now then; before I have to spend the money at Rally Design Does anyone know where I can get a 1 litre bottle and carrier from. My local Halfords (x2) only stock 800 ml ones. Alternatively If anyone localish to me (so I can pick it up) can get one can you let me know ASAP through here or email beeland@btinternet.com. Desparate now Ta Quote Link to comment Share on other sites More sharing options...
Mark Stanton Posted February 25, 2003 Share Posted February 25, 2003 You could always write 1 litre capacity on it Obviously I wouldn't condone such an action I'll have a look at my local halfrauds - won't be there until weekend though Quote Link to comment Share on other sites More sharing options...
SteveD Posted February 25, 2003 Share Posted February 25, 2003 i have a large stock of 1 1/2 Litre alloy bottles that fit in a pushbike bottle carrier Quote Link to comment Share on other sites More sharing options...
Arm Posted February 25, 2003 Share Posted February 25, 2003 i have a large stock of 1 1/2 Litre alloy bottles that fit in a pushbike bottle carrier ? Quote Link to comment Share on other sites More sharing options...
SteveD Posted February 25, 2003 Share Posted February 25, 2003 ??????????????????????? to you two MASON Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.