Atlas12v Posted March 22, 2013 Posted March 22, 2013 After a fuel tank suitable for Narrow chassis. Not sure if they vary from the wide ones anyway. I need something 700mm wide or less. Please PM if you have something. Thanks Atlas
KenP Posted March 22, 2013 Posted March 22, 2013 I may have one but will need to check dims tomorrow Is it for injection or carbs?
KenP Posted March 22, 2013 Posted March 22, 2013 May be OK then but out of my wide so best I pit a tape over it and send you the sizes. Ken
Geoff101 Posted March 23, 2013 Posted March 23, 2013 Are you sure about the dimension? The one in my narrow (independant) is 812mm
KenP Posted March 23, 2013 Posted March 23, 2013 Hi Atlas OK here are the basic dimensions http://s1187.photobucket.com/albums/z400/ken_p/?action=view¤t=Default_zps47d59ebc.png The 190mm hight is the taller front as the bottom tapers so the rear is only 160mm Ken
Atlas12v Posted March 23, 2013 Author Posted March 23, 2013 Will check again but my current one fits between the rollbar stays which as 740mm apart apporx.
Atlas12v Posted March 23, 2013 Author Posted March 23, 2013 Will check again but my current one fits between the rollbar stays which as 740mm apart apporx. So I think Ken yours will sadly be far too wide thanks for the specs though. Will confirm.
KenP Posted March 24, 2013 Posted March 24, 2013 No problem, just let me know. It's there if you want it. Ken
Atlas12v Posted March 26, 2013 Author Posted March 26, 2013 Hi Ken, Thanks for the measurements. I've checked mine and the gap between the diagonal bars is 720mm so max tank width can only be 690/700mm.
Recommended Posts