Search the Community
Showing results for tags 'low line'.
Well actually no it didn't One of the biggest challenges when trying to fit the CVH engine into our project car was, would the bonnet go on afterwards. Obviously we spent hours meticulously measuring and comparing the position of the engine in the chassis with my other car "Marilyn", before the body was reunited with the rest of the car, only to find out we were about 20mm high right at the front of the engine. To cut a long and stressful story short, because we didn't want a power bulge in the bonnet, a company called Fibet came to our rescue. They manufacture Isolation Mounts in all shapes sizes and specs for automotive as well as industrial use . I contacted them via their website explained the issue and what we were trying to do. To my surprise they responded almost immediately explained that the item we needed was out of stock, but they would be doing a production run in the next two weeks. True to their word two weeks later I get a package in the post with the new engine mounts supplied completely free of charge including p&p... Fantastic!!! Who said customer service was dead, it's alive and very well at www.fibet.co.uk for sure After getting home from Stoneleigh on Sunday parked the two cars in the drive next to each other for the first time. Now it's easy to see why we had so much trouble when you compare the project car to Marilyn in the background. All worked out well in the end.... anybody looking for a nice 1989 SEi only covered 1600 miles from new G.
How to tell the difference between a Narrow Body and a Wide Body If you don’t have a tape measure to hand then the two most visual differences between a narrow and wide body car are around the rear lights and also the shoulder panel next to the seat. Starting with the shoulder panel, a narrow car will have a flat, vertical internal panel next to your shoulder. On a wide body car the GRP tub is extended into the cockpit to create a scalloped or chamfered panel to give more shoulder room. These first two pictures show an example of the shoulder panel on a narrow bodied car. Whilst on a Wide body car, the first of these pictures shows the chamfered tub used with ZK bodywork, whist the second shows the scallop of the earlier “kit” wide bodywork. The second method of telling the difference between a wide an narrow is the shape of the bdy tub around the rear lights. The wide body chassis was available with either fixed or detachable rear arches; whist the narrow was only available with fixed rear aches. Therefore if the car has detachable arches, which can be seen with a join line between the tub and arch as in the picture below then it will be a wide body car. If the car has fixed arches then it could be either a wide or a narrow. These first two pictures show examples of wide body Westfield’s. Note how the rear lights are partially recessed into the tub on their inside edge in a square recess. On a narrow however the arches are slightly wider and the arch has a smooth contour into the main body with no recess for the lamp. Note: I am aware that there is also some wide body tubs they may have rear arches similar to the narrow and therefore it is wise to also check the shape of the shoulder panel also to help with identification.