Part 3 - Brass Monkeys!
Entry posted by JPLS
1,951 views
Been a little while since my last update - some progress made, slightly beaten by the cold weather, but persevered 
All brake and fuel pipes now installed - routed the two fuel pipes either side of the Clutch master cylinder to give me plenty of clearance for the gearbox/clutch slave cylinder.
http://s1358.beta.photobucket.com/user/scraggj/media/IMG_0144_zps73afa94e.jpg.html?sort=3&o=3
Getting heavy to turn the chassis - the wife is starting to complain. Perhaps I should offer some help!
Sick of riveting and pipe bending so I moved on to some spannering - trial fitting the front and rear suspension. The 4" bolt supplied for the top rear suspension mount is too short - will refit with a 4.5" when I reassemble - the shocks and diff bracket will have to come off before I install the diff anyway.
http://s1358.beta.photobucket.com/user/scraggj/media/IMG_0146_zps80811c58.jpg.html?sort=3&o=2
http://s1358.beta.photobucket.com/user/scraggj/media/IMG_0147_zps633270e4.jpg.html?sort=3&o=2
Done some painting - front uprights.
http://s1358.beta.photobucket.com/user/scraggj/media/IMG_0148_zps014b0f5f.jpg.html?sort=3&o=1
and Diff housing
http://s1358.beta.photobucket.com/user/scraggj/media/IMG_0149_zpsa4986fad.jpg.html?sort=3&o=0
Can you guess the body colour I have opted for then?
I have chosen to replace bearings at all 4 corners - so rear uprights will need some professional help or a BFH to releave them of their old bearing shells. Any hints?
Completion kit due in March, so plenty of time to get the uprights fettled and then I can turn to look at what the engine and gearbox need........
CYA next time. 
PS - How do I add photos to this blog without using photobucket?
4 Comments
Recommended Comments