tjwoods Posted February 17, 2013 Share Posted February 17, 2013 I recently purchased an engine package from e-bay from a company called Mtech Automotive situated in Westbury Wiltshire. The package we bought was their "Zetec 170" which consisted of a brand new 2.0 blacktop engine, jenvey TB's and an omex 600 ecu. Shortly after we payed our deposit the engine was in and ready to be picked up. After a few late nights the engine was in and we decided to leave the wiring and finishing touches to the professionals. We took the westie up to Mtech and where greeted by one of the guys who where going to be working on the westie. He discussed the plan of action and got straight to work. 3 days later we had a phone call saying it was ready to collect. After a short drive up there, there she was in all her glory. I could not fault any of the work these guys carried out it was pure magic. TB's bolted on, ecu wired up and mapped producing a very respectable 174bhp with 150ftlb of torque. The plumbing and wiring which was carried out was some of the neatest I have ever seen. These guys are fully equipped with a Rolling Road and will take on any project no matter how ambitious it may seem. Dont just take my word for it check them out www.mtechautomotive.co.uk Massive thank you to Matt and the team at Mtech. Highly recommended! Quote Link to comment Share on other sites More sharing options...
Matt Thorne Posted May 2, 2013 Share Posted May 2, 2013 Hi chaps, just found this, and would like to say a big thanks for the feedback... look forward to seeing you guys over xmas for some cams and we can go for tickling the 200bhp mark! Enjoy the car, and speak soon Matt @ M-Tech Quote Link to comment Share on other sites More sharing options...
alexander72 Posted May 2, 2013 Share Posted May 2, 2013 Looks good, nice one Quote Link to comment Share on other sites More sharing options...
Playo Posted May 3, 2013 Share Posted May 3, 2013 Looks like you had a great service! @Matt what cams will you be using to up the power? I'm currently running a similar spec as tjwoods on my silvertop (dynoed 170hp with NMS) and Im deciding which way to go next, your closer to me than NMS too so could make my life a little easier Quote Link to comment Share on other sites More sharing options...
Mark Stanton Posted May 9, 2013 Share Posted May 9, 2013 Hi Matt as a dealer in specialist tuning products would you like to receive further details on the WSCC and various advertising options we have available from Trader Status, mag advertising etc just let me know - Thanks Quote Link to comment Share on other sites More sharing options...
Meakin Posted May 9, 2013 Share Posted May 9, 2013 I have bought the nodiz pro from matt and Mtech must say I am very impressed with the kit. Just set up 2d at the moment and the diode pack has just arrived for my 12v tacho so will be posting more on my blog fairly soon (I hope depends on work as at the moment it it going crazy). Again very supportive and cracking piece of kit. Highly recommended Paul Quote Link to comment Share on other sites More sharing options...
Matt Thorne Posted May 10, 2013 Share Posted May 10, 2013 @Mark... Yes please... please PM me @Paul - Thanks paul, glad its going well for you! Matt Quote Link to comment Share on other sites More sharing options...
Matt Thorne Posted May 13, 2013 Share Posted May 13, 2013 Paul, Do you have a link to your blog please? And would you mind me using any pics for a case study on the Nodiz Pro website? regards, Matt Quote Link to comment Share on other sites More sharing options...
Meakin Posted May 13, 2013 Share Posted May 13, 2013 Hi Matt, Blog part 6 is http://forum.wscc.co.uk/forum/index.php/blog/18/entry-75-swapping-xflow-to-zetec-in-narrow-lowline-westfield/ and of course you can Paul Quote Link to comment Share on other sites More sharing options...
Matt Thorne Posted May 21, 2013 Share Posted May 21, 2013 Paul, That's a great write up! Thanks! Look forward to more updates! Thanks, Matt Quote Link to comment Share on other sites More sharing options...
Mark Stanton Posted May 21, 2013 Share Posted May 21, 2013 HI Matt - did you receive the info I sent over ? Just give me a shout if you would like to consider any options Thanks Mark 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.