pickmaster Andy Lowe Posted February 3, 2013 Posted February 3, 2013 Hi have some spare Samco hoses after swapping engines over Christmas Samco 32mm straight 1 meter x2 off cost £28.30 each sell £20 each Samco 16mm straight 1 meter x1 off cost £20.82 sell £15 One off Ash 45deg 16mm bend cost £8 sell £5 Free postage Or have the lot for £50 posted Have a look on my blog for photos of hoses these are the same but unused new
Shaggydoo Posted February 3, 2013 Posted February 3, 2013 Would there be enough hose to replace my zetec blacktop hoses? Mine has raceline water rail but no heater matrix.
pickmaster Andy Lowe Posted February 3, 2013 Author Posted February 3, 2013 It cost me the best part of £350 to replace all my hoses!!!!! I do have a heater but I don't think they would replace all Probably engine to rad and back but you would still need to buy bends and joint tubes that's where the money goes
pickmaster Andy Lowe Posted February 3, 2013 Author Posted February 3, 2013 I was thinking where abouts are you? Anywhere near N/Wales you need to look at one see how it's run and where it's run I run the expansion tank off the rad as recommended by Chester Sports Cars so it doesn't get back pressure on warm up and overflow like some do
Shaggydoo Posted February 3, 2013 Posted February 3, 2013 I'm in Yorkshire near Wakefield. There seems to be very little actual hose on my setup, long runs are aluminium tube. Check out my gallery pic of my engine bay. Would the expansion tank outlet be 16mm and rad hose be 32mm?
pickmaster Andy Lowe Posted February 3, 2013 Author Posted February 3, 2013 Yes rad hose were 32 but went to 35 at pump Expansion tank was 16 but went to I think 22 on tank Samco did a 32 to 35 120 deg reducing elbow that I fitted off pump
Recommended Posts