Terryathome Posted August 27, 2012 Posted August 27, 2012 I'm nearly at the point of making my mind up of upgrading with new engine and gearbox but i have a 1.8 Zetec that could be for sale if i go ahead. Ford Zetec 1.8 Engine code RKC Brand new 45mm Jenvey throttle bodies Brand new inlet manifold Brand new TPS 90mm trumpets Brand new Pipercross air filter Brand new FZ1802 cams Brand new verniers Brand new 330cc injectors Brand new Raceline sump Brand new HT leads Have receipts if required. All put together about 6 months ago. The engine was supplied brand new to the original builder in 2005 and went through IVA in 2006 has about 17k miles on it from memory. The gearbox is a MT75 (with quick shift) and that goes with the engine (but may split if not sold as a package with the engine) It also has MBE 967E which will also be spare complete with immobilizer (key fob type) It will have all the bits with it starter motor, alternator, all the engine sensors. Will even through in the fuel pressure regulator. Not to forget the exhaust, that will be up for grabs aswell complete with Lambda sensor. Remapped at WGT at 149bhp (printout available) Can be heard running as it's still in the car, can even drive the thing if you want. Lots of vids of the engine here http://www.youtube.c...me?feature=mhee If you buy the job lot you can even help take it out of the car if you want. Anyway whats it worth guys? Job lot first. (If it goes in a one then pick up only, I'm not putting this lot in a create) Or in bits (will post the small items but not the big bits) Anybody interested? Terry
Mat Jackson Posted August 28, 2012 Posted August 28, 2012 I know you are selling it as a job lot first......... But, if you are splitting then I would be intereted in TBs and ECU..........
Rusty Nuts Posted August 28, 2012 Posted August 28, 2012 Hi Terryathome, I bought an engine package similar to yours, from Tim a while ago for £1200 see link to the for sale thread hope this gives you an idea of where to pitch it. It sounds like a cracking engine with all the ancillaries. http://forum.wscc.co.uk/forum/index.php?/topic/91261-1800-zetec-on-jenvey-tbs-and-mbe-ecu-for-sale/page__p__920015__hl__shindha__fromsearch__1#entry920015
Terryathome Posted August 28, 2012 Author Posted August 28, 2012 Joe, yes i remember that post, wanted to buy myself but just missed out. Asking £1500 but reduced to £1200 for quick sale. However I'm not after a quick sale so i think about £1500 might be about right. (I must be mad I'm losing a fourtune here) It's a lot of kit so i think it could be a bargin for someone. Mat, I have just replied to Craig re TB's and ECU and I think i will have to make a decision at some point about this. I realy need to make my mind up if i'm going to break up the package and set a price for the bits myself. I do not want to start a bidding war as that would be wrong in my book with fellow members. So please let the thread run for a bit, maybe someone might want the whole package. Terry
1313 Posted August 28, 2012 Posted August 28, 2012 Are you interested in selling the sump separate? Thanks ad
Terryathome Posted August 28, 2012 Author Posted August 28, 2012 Please do not reply to this thread just for the moment, the items for sale may change due to engine selection. The engine selection has been made. 2 litre Zetec Phase 3. The above will mean that most of the bits will be used on the new engine. I have sent emails to those who contacted me as i think that was the right thing to do rather than read it on here first. Thanks for all the interest Terry
Recommended Posts