RichP Posted September 14, 2011 Posted September 14, 2011 ETB Instruments DigiDash2 Pro (dash readout + datalogger) that I bought last year but have never fitted (other non-car projects took over). It does too much to try and write it all down here – please see details in the link below. I’ll check but I’m sure I bought the enhanced 5Hz GPS receiver to go with it so it can support track mapping etc. As mentioned it’s never been used or fitted to the car. The only thing that I can’t supply is the 2 little magnets that you glue into the hub / propshaft because I did fit these when the prop was out of the car and it was convenient to do it. I’m sure it’s not beyond the wit of man to overcome this – a couple of bicycle speedo magnets from Halfords will probably do it, or get them direct from ETB. The dash was pre-set with the mileage of my car at the time (and it’s not changed since), but the chaps at ETB are very amenable and with a copy of your last MOT certificate I’m sure they’d be happy to change that to suit your own car. The whole kit cost me something around £800 – I’d sell it for £600 + delivery, but won’t take offers below that as it’s no different to a new one. I’ll post pictures later but you get what’s shown on the link – it’s all still in the box. http://www.etbinstruments.com/DD2_Pro_Plus.htm
RichP Posted November 1, 2011 Author Posted November 1, 2011 Set by ETB at the time of purchase to suit my car - could be changed by ETB to suit your own car's mileage.
Recommended Posts