Any Burgular alarm Engineers?

[jay.perry]

Hi guys dont know if there is any one on here but i'm after the reset code for my alarm. After a few burgularies in the area i decided to swap the sensors in the garage as they didn't seem as sensative as they used to be, however the alarm will not set now. I think it is because the tamper function has been activated and needs to be reset. its a guardtec 300 series. Ive had a quick look on the net but for obvious reasons the code cannot be found!!

Thanks in advance Jay

[carpetstu]

usually the reset code is the same as your 4 digit entry code. It might want the main fuse pulling inside the box and resetting that way. My system throws a wobbly sometimes and it cures it.

Some info here on operational controls

http://www.ukpanels.com/downloa....ser.pdf

Some more info here

http://www.howtomendit.com/answers.php?id=124499

If you get stuck I know an alarm engineer you could call for some advice on resetting with alarm engineers codes if he will give them over

[jay.perry]

Thanks Stu, will have a play around tomorrow, bit late now to be upsetting the neighbours!!

[carpetstu]

you have pm

[Rich8977]

Jay

Have you sorted the issue out with your alarm? if not let me know i am in the trade.

Regards

Rich

[jay.perry]

Hi Rich,  i think i've sorted it, seems to be working ok now.

Thanks anyway,Jay