NDS Posted December 20, 2010 Posted December 20, 2010 Vauxhall redtop parts: Vauxhall 2 litre Engine (Non Cocast) head inc Starter, Alternator on Caterham mounting with single V belt new HP oil pump and Filter blanking plate with -8 fittings (Oil pump blanking plug for remote filter and front cover cost £475.00) - no sump £450.00 Vauxhall 2litre Engine Less inlet/exhaust manifold ex Calibra , Inc starter, alternator coil packs, on poly v belt standard.injectors Standard sump. £300.00 Vauxhall Block – Bare used for mocking up £50.00 Vauxhall Crank – standard (pistons and rods available if required). £50.00 Vauxhall Red Top Engine mounts, with HD mounts £55.00 Vauxhall SBD 100mm sump and oil pick up pipe £125.00 SOLD Westfield Exhaust manifold low exit. £120 Titan dry sump kit complete, Scavenge pump. Front cover, Mounting plate Toothed belt, Crank pulley, Sump, Test fitted to engine only £650.00 SBD Ford type 9 bell housing £130 Westfield Exhaust manifold low exit. £120 ( no digs but used) Ford Type 9 with Caterham stick extension and rose jointed £150.00 Ford Type 9 standard Steel belhousing- £100.00 Can arrange delivery by DHL prefer collection Neil 01738 550005 Perth UK.
jim_l Posted December 23, 2010 Posted December 23, 2010 did you get my pm re: engine mounts? first dibs pls
mikehreynolds Posted December 27, 2010 Posted December 27, 2010 First dibs on dry sump please, do you know how old it is and if the pump has had the mod? Regards
GeordieBarry Posted January 7, 2011 Posted January 7, 2011 Not sure if PMs are getting through so e-mail address is: barry@datapro.gotadsl.co.uk For pictures of Westfield low exit manifold
griffith500user Posted August 25, 2012 Posted August 25, 2012 Just on the off chance wondering if the XE to type 9 bellhousing might still be kicking around, engine mounts for that matter too? Dom
Recommended Posts