oilman Posted February 19, 2003 Posted February 19, 2003 After finally getting the exhaust manifold through the hole and mounting it on the side of the engine, I have carried on an put on the rear exhaust mounting. However there is a bit of a discrepency between the end of the exhaust and the mount. About 1.5" in fact. Looking at it I need to cut 1.5" off of the end of the manifold tube so that the silencer will slide on correctly. Before I make the cut, can anybody else tell me if they have had to make this kind of adjustment or if there is something that I should look out for? Quote
neo Posted February 19, 2003 Posted February 19, 2003 oilman i had to do yhe same, mine was about that as well inch and a half or so, better longer than shorter though Quote
oilman Posted February 20, 2003 Author Posted February 20, 2003 Great. I couldn't see that there would be a problem but not a bad idea to ask. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.