timblejim Posted September 12, 2010 Posted September 12, 2010 Now then, now then.... due to a change in direction this will need to go after Mid October. This is intended to be a drop in package Will be looking to sell as a package preferably or might split if no interest. Gauging interest within the club before going on pistonheads 1587 cc toyota 4AG-E engine- approx 160 ish bhp Fresh this season with New rings, shells and mains/ARP rod bolts- Supercharged crank Gary goodyear ported/skimmed head Compression ratio 12:1. kent cams with alloy verniers kent cam belt New oil pump/water pump Currently on new 45's on my own manifold, but would match up to throttle bodies with a manifold that I have which is matched to the head Currently running on ignition only Emerald ECU which is also available as well as the loom Helix alloy flywheel and cerametalic sprung clutch plate/ HD cover Steel exhaust manifold 4-1 and collector- probably wunoff silencer box also Currently on steel shortened sump but have a High capacity low level one off alloy sump A whole load of spares-Supercharged crank/starters/alternators/clutch/oil pumps/watrepumps/ timing belts x2. Another head with Piper 300 cams and TRD undercap shims. Set of home made verniers. Spare rods/pistons. 1 standard head/loads of valves I'll need to do an audit of spares - sure there is more! Facet fuel pump red top x 2 Also have gearbox- Type 9 SCCR with tran-x gearkit. Rebuilt last year with new bearings & baulk rings Toyota bellhousing to fit above English CWP 4.7 ratio English CWP 4.4 ratio narrow SE windscreen and pillars 2x toyos- 205/45/15- 4mm 4 x 195/45/15 stunners -5mm plus Basically, I need to clear from mid October and would rather offer to club members initially but do need sensible offers. Give me a call to discuss - Ta tim 07841828382
John Loudon - Sponsorship Liaison Posted September 14, 2010 Posted September 14, 2010 QUOTE due to a change in direction Are you planniong on going in reverse then mate? A seriously good package for someone wanting to swap to a full ready to go 16v package without spending a fortune. Give the man a call..........
scott beeland Posted September 14, 2010 Posted September 14, 2010 Going to play with the BEC boys Tim?
Captain Colonial Posted September 14, 2010 Posted September 14, 2010 What finish is on the windscreen pillars please?
timblejim Posted September 16, 2010 Author Posted September 16, 2010 Pillars currently smooth and sprayed satin black to match the screen
timblejim Posted September 16, 2010 Author Posted September 16, 2010 Going to play with the BEC boys Tim? you never quite know what ur gonna get........life is like a box of chocs! could be fun!
Captain Colonial Posted September 17, 2010 Posted September 17, 2010 Pillars currently smooth and sprayed satin black to match the screen Thanks for responding, not quite what I wanted though, sorry! Good luck with the sale!
mavhh Posted October 8, 2010 Posted October 8, 2010 "High capacity low level one off alloy sump" Is it still available? Any idea of a price? I PM'd you but had no response yet. Thanks, Dave
John Loudon - Sponsorship Liaison Posted October 8, 2010 Posted October 8, 2010 Tim is getting married today and will no doubt then be a way for a few days on honeymoon so bear with him
SteveD Posted October 8, 2010 Posted October 8, 2010 Tim is getting married today and will no doubt then be a way for a few days on honeymoon so bear with him yeh anglesey next weekend
Recommended Posts