removing rear wishbones

[D Evans]

Have recently bought a 1990SEiW.        

I'm looking to remove the (rusty) rear wishbones to get them re- powdercoated. Not a problem apart from the fact that I can't seem to be able to get anything on to the nut at the lower forward mounting to lock it in place  

Any help or suggestions gratefully recieved  

[george]

If yours is built like mine (and no two seem the same ), when you remove the seats, you'll find a rubber plug (about 2" diameter) near the floor / near the tunnel.  Removing it gives access to the front mount of the lower A-arm.  You'll also want that access for alignment as well as tightening when you reassemble.  

Enjoy.  

[D Evans]

Aaaahhhhhhhh!!!!          

That makes a lot more sense  

Thanks