GGSWESTY Posted June 23, 2010 Posted June 23, 2010 RMP1991 - Silencer - Large Bore Will fit to a 2.0 Zetec Large Bore Stainless Steel, re packable 6 inch diameter silencer with mountings for Westfield type installation. For power outputs exceeding 200 bhp Bought direct from Dunnel for £335 Unfortunately it dont fit my down pipe arrangement - so its up for grabs. Selling for £250 + P&P
Mid life crisis Posted June 23, 2010 Posted June 23, 2010 That green typeface makes reading the post hard work, or is it my aging eyes!!
Stryder5 Posted June 24, 2010 Posted June 24, 2010 Why didn't it fit, what downpipe arrangement do you have. Will it fit a standard Westfield zetec manifold? thanks
GGSWESTY Posted June 24, 2010 Author Posted June 24, 2010 It didnt fit to mine as I have a different down pipe / manifold. The original owner spent a small fortune on the car and it looks like the exhaust system was one of the areas that was worked on. I went for the dunnel one as I found a receipt in my pack of docs from the original owner .... but this must have been for an earlier upgrade. So ended up going for the easier route of having the old box reconditioned. The pipe silencer is a big bore one - so if you just have a standard downpipe my guess is it probably will not fit - the inlet pipe is ~2.5inches in diameter... not sure what size a std inlet pipe is !
Recommended Posts