mhc Posted October 29, 2008 Share Posted October 29, 2008 Due to space requirements, the following is for sale. £695. Massive price reduction I really do need the space. The reason its posted in the parts for sale is that it is just a collection of parts. Sometimes a collection of parts like this is described as a basket case, a fair description. This is what you will get for your money. Chassis no 22 , with slight surface rust, steering column, pedals, master cylinders etc. Roll cage. Seats. Aluminium main body, aluminium scuttle, and bonnet. Fibre glass nosecone and cycle wings. A fibre glass mould for the rear wings. Full rear suspension includes trailing arms, panhard rod, and dampers with springs. Rear axle in bits includes brake drums diff etc. Full front suspension , Triumph uprights with discs, ally hubs and brake calipers, dampers and springs. Wishbones , steering rack . Radiator with assorted hoses. Prop shaft. Windscreen with pillars. There are no wheels Its almost complete apart from an engine and gearbox. It was partly converted to take a Zetec engine and 5 speed gearbox. There is a V5 . The first MOT was in 1985. Original aluminium Westfield 7s are very rare, and one day will be most sort after. If any Westfield car can claim to having heritage, this is it. This rebuild is not for the faint hearted or those bereft of the required skills. But the time and effort will be well rewarded An offer of £695 will be welcomed, considered, and accepted. Regards. Link to comment Share on other sites More sharing options...
Mark Stanton Posted October 29, 2008 Share Posted October 29, 2008 Bet that's got an early chassis number would be good to see it back on the road Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted October 29, 2008 Share Posted October 29, 2008 It would go like stink with a nice light and revvy engine If only I had some dosh - amongst other things Link to comment Share on other sites More sharing options...
mhc Posted October 29, 2008 Author Share Posted October 29, 2008 A nice light ,revving engine with a set of these on these on one side.[ That would be a Puma engine then, now that would be a nice bit of kit, its also avalible. What a quick little car you could make with these parts. Perhaps offers for the lot? Regards. Link to comment Share on other sites More sharing options...
mhc Posted November 16, 2008 Author Share Posted November 16, 2008 Massive Price reduction. Because I really do need the space. Hi tech Westfield on the go. Regards Mick. Link to comment Share on other sites More sharing options...
kik1.6se Posted November 16, 2008 Share Posted November 16, 2008 Looks like an interesting project. Where are you in the country, out of interest? Kirk Link to comment Share on other sites More sharing options...
pistonbroke Posted November 16, 2008 Share Posted November 16, 2008 he lives in a tent so musst be a Pikey Link to comment Share on other sites More sharing options...
mhc Posted November 16, 2008 Author Share Posted November 16, 2008 I live close to Nottingham. One of the reasons the prelit is for sale is because the tent is too small for 3 westfieds and me. But I have been known to haggle like a pikey when the occasion demands. Regards. Link to comment Share on other sites More sharing options...
RICHARD+PHILIP Posted November 16, 2008 Share Posted November 16, 2008 Mick you have PM Link to comment Share on other sites More sharing options...
mhc Posted November 17, 2008 Author Share Posted November 17, 2008 To all the people who have expressed an interest in this dismantled car, and have provisionally promised to come along this weekend. Please note. To be fair ,I can only sell on a first come , first serve basis. Please phone to confirm if you are coming. 07931 772 444. Regards. Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted November 17, 2008 Share Posted November 17, 2008 ...and make sure you take a trailer or van to take it away in as Mick REALLY does want the space. BTW - I am much jealous of whover gets its. A stripped out Prelit with a nice dose of carbon panels and a healthy light revvy Puma engine would be awsome and a while back there were plans for this brain child but the credit crunch and job loss have scuppered all such plans Link to comment Share on other sites More sharing options...
TerryC Posted November 20, 2008 Share Posted November 20, 2008 Has it gone yet? Link to comment Share on other sites More sharing options...
mhc Posted November 21, 2008 Author Share Posted November 21, 2008 Its still for sale . I have now found the interior panels, fuel tank, aluminium panels, and the 2 rear wings with lights and the bias bar for the brake pedal. The price is now raised to £775. Saturday will be the last veiwing day. Then it will fall into the arms of E-bay. Its still a very cheap kit of parts. 2nd to see will buy. The first was 6-2" and 15+ stone , too big for the car. Regards Link to comment Share on other sites More sharing options...
tony123 Posted November 21, 2008 Share Posted November 21, 2008 i,m the fat one who saw the car ,sadly to large it's a cracking buy Link to comment Share on other sites More sharing options...
CraigC Posted November 26, 2008 Share Posted November 26, 2008 Hi Can you let me know the status of this please - still for sale or sold? Also just how many bits are there - not quantity but how many still attached to chasis etc? Do you have any other pictures as I guess it's not as shown? Thanks Craig Link to comment Share on other sites More sharing options...
Recommended Posts