Westfield Hazard Switch

[Mike Lloyd]

Can anyone help me with the wiring connections for the Westfield hazard lights Switch?

I am using a premier loom, I have looked in the Westfiled build manual and surprise..... the pin no's do not match up with the pins on the switch.

Any help appreciated

I have tried to work it out using my DVM, however there are seven pins and I struggle on any more than three

[Mike Lloyd]

Anyone got a Westfield hazard switch and access to the back of their dash, please check which colour wires go to which pins.

Many thanks

[Tigger]

Mike,

Not sure if it's going to be any help but I have a diagram using a premier wiring loom and Durite switches (bit chunkier than standard westfield) which you can view online?

CLICKY

Tiggs

[Mike Lloyd]

Thanks Tiggs

Almost very helpful, wish the premier loom came with circuit diagrams they make a lot more sense!

Unfortunately pin layout is different to the Westfield switch.

Someone must have their dashboard out and the back of this switch showing

Looks like it's a call to the factory

[adamnreeves]

Mike,

Click here, does this help, if not I can check my loom if you wish, let me know.

[Mike Lloyd]

Thank Adam

My switch only has pins 1,2,3,5,6,8 i.e 4 and 7 are missing, the  numbering of the wires in the post (as in the westfield manual) don't correspond with the pins on the switch

[adamnreeves]

Thank Adam

My switch only has pins 1,2,3,5,6,8 i.e 4 and 7 are missing, the  numbering of the wires in the post (as in the westfield manual) don't correspond with the pins on the switch

My loom is out so I shall take a look tonight and let you know.

[Mike Lloyd]

 

[adamnreeves]

 

Okay Mike,

Here's a photo of the reverse side of my Westfield switch and loom. The switch pins are numbered:

10   9

8     7

6     5

4     3

2     1

As you can see:

1=light green

2=purple

3=green/white

5=green/red

6=pink/green

8=green

10=black

highres

[Mike Lloyd]

That's great, thanks Adam.

Much appreciated