daglish Posted January 23, 2008 Posted January 23, 2008 Hi All, I'm doing the usual clear out stuff, need to raise money for racing this season. In no particular order: Item Descrption Polo Rad, 35mm thick core, good condition £sold Polo Rad, 25mm thick core, V good condition £30 Polo Rad ducting, Fabricated radiator ducted box. Bolts straight on. £sold English diff, 3.89 ratio, mint condition, new bearings, gasket, just rebuilt by Fostek Engineering, never used. £SOLD English diff, 3.54 ratio, as above condition, used at Snetterton once, mint condition. Prepared by Fostek Engineering with all new bearings and gasket. Fitted with small westfield flange, ready to race. £SOLD Tyres, 1 full set of Avon ACB 10's, 3mm tread, road legal, BARC Westfield championship tyres. £sold . Tyres, 1 full set of Avon ACB 10's, 2-3mm tread, road legal, BARC Westfield championship tyres.£30 the set. Zetec Sump, Like new, ready to bolt on. Could be chopped to make like a Schalor or Dunnell. C/w gasket, pick up pipe and sump plug. Used once only at Oulton. Photos can be supplied to show how to chop and modify. Sold Zetec Engine pulley Covers, Brand new, oil pump and water pump plastic engine covers. £sold Zetec Oil filters, 3 off brand new shallow oil filters £8.50 the lot. Zetec Thermostat housing, Second hand thermostat housing, carried as a spare last year. Bit dusty good condition, no cracks. £18 Sealey voltmeter and Ammeter, Like new, only used a few time, Sealey BT91/5 Voltmeter and Ammeter. RRP £145, My Price £80 Westfield Body work, Drivers side rear wheel arch, black. Damaged below light cluster, but passes scrutineering £35 Zetec water pump, bit dusty, carried as a spare last season £10 Zetec oil pump, bit dusty, carried as a spare last season £SOLD M16 brake caliper, new seals fitted, left hand side £30 5 speed type 9 gearbox, partly striped, all bit still with box. Has bell housing and gear stick attached. Very good condition inside. Bought from a westfield owner who had it in his road car. Just needs reassembling. £35 New Items: One set of dunlop all weather tyres three meetings old, good condition: Sold Ford Zetec Starter motor, very good condition as borrowed by Andrew Spencer at Pembrey, fits Type 9 or Rocket gearbox bell housing. Apperently the same as a sierra. This was carried as my spare last season. £sold I have lots more bits to hunt out and will add them as and when I get to them. If you are look for something which isn't here, then drop me a line cause I may have what your looking for. Photos can be supplied as required, please fell free to contact me, Mobile 07762 069088 Home 0191 3889429 Regards, Peter Daglish
John Loudon - Sponsorship Liaison Posted January 24, 2008 Posted January 24, 2008 Kevin Keegan land I think?
Rourkey Posted January 24, 2008 Posted January 24, 2008 Hi Peter, Is the Zetec sump the standard style that would usually ship with the engine or a shallow one. If you could let me know I might be interested. Also where abouts is the item located ? Cheers, Martin
westfield_bumble Posted January 24, 2008 Posted January 24, 2008 Pete's located Chester-le-street. Have texted him to let him know your interested in sump and he'll get back to you when he finishes work. Might be interested in the 3.89 diff myself
daglish Posted January 24, 2008 Author Posted January 24, 2008 All items located in my garage in the North East. The tyres are 13" apologies for not putting that on the ad. The sump is the standard which you get when you buy the base engine. It is the one with the big cut out that most people fill out for bigger capacity. Like I say I have the photos for how to modify and baffle. Happy reading.
daglish Posted January 28, 2008 Author Posted January 28, 2008 Pm sent about tyres. Thanks for reading ad.
chrischild Posted February 4, 2008 Posted February 4, 2008 Is there an LSD with the 3.89 English axle ? If so I'm interested.
daglish Posted February 5, 2008 Author Posted February 5, 2008 Pm sent about Sump. All diffs now sold, thanks for viewing advert.
Underground Ernie Posted February 7, 2008 Posted February 7, 2008 PM sent regarding oil pump & starter Mitch
GSi Posted February 7, 2008 Posted February 7, 2008 Engine pulley covers still available? Are they postable? Rob
cast iron Posted February 7, 2008 Posted February 7, 2008 If anyone wants any of this stuff taking to the speed series awards I could possibly meet Peter to collect
Recommended Posts