CarbonMods Posted August 29, 2007 Posted August 29, 2007 Hi Nick, I understand you spoke to my brother Paul about your aeroscreen alignment issues yesterday. Since Dan had the same issue (though apparantly only maybe more like 3mm) we'll check the dimensions of the trimming jig. After Dan fitted his and didn't mention any problems (and I've seen it fitted and it looks spot-on) we assumed all was right. I know the mould is true so the problem must be with the trimming. We'll look at this immediatly and all future screens will not be affected. Let me know if you need any help, you know we'll do everything we can. David C, for a bootlid cover price just look on our website at the 500mm x 1000mm sandwich panel (we should make it clear it's perfect for a bootlid on there somewhere!). Quote
darthurs Posted August 29, 2007 Posted August 29, 2007 Yes, we did take a bit off the front drivers side edge, but we put this down to us trying to fit it around where my mirrors are attached to the scuttle. Let me know if you need any measurements off mine so you can cross check your alignment is similar. Thanks Dan Quote
CedricTheBrave Posted August 30, 2007 Posted August 30, 2007 Has anyone asked about some half doors like the fluke ones? Quote
rm163603 Posted August 30, 2007 Posted August 30, 2007 Has anyone asked about some half doors like the fluke ones? Good point. I would like some half doors. Quote
higgsti Posted August 30, 2007 Author Posted August 30, 2007 yes they have amongst other things but for some reason there busy doing cycle wings and dash boards .and my stuffs always on the back burner Quote
COREdevelopments Posted August 30, 2007 Posted August 30, 2007 matt did you get my email regarding dimentions for eared dash? or has anyone got dimentions to hand? im eager to get the order placed. atb rob Quote
CarbonMods Posted September 3, 2007 Posted September 3, 2007 Hi, Yep, we're looking into the stone chips guards as soon as we're back on track after this raft of orders. There are two ways we're thinking of doing the stone-chip guards, one way is match tooling them exactly like we do with the canards, the other way is to match tool them again but see if we can work a polymer coating into them so that they have the same actual resistance to stone chips that our flat stone-chip gaurds have. We'll keep you posted. As for the group-buy, please accept our apologies if we havn't contacted you to arrange payment and delivery yet, we are working our way through each and every order and no-one will miss out. Anyone who's in a hurry just let us know and we'll bump you to the front of the queue (like we've done with other orders) so please just get in touch if you need yours asap. Many thanks! - Matt Quote
CarbonMods Posted September 27, 2007 Posted September 27, 2007 Rob, you got PM back. Higsti, I'm pretty sure Paul wanted to put a bow on them and put them under your tree in a couple of months ;-) - Seriously, we'll get something out to you!! Quote
Pilot Pete Posted November 7, 2007 Posted November 7, 2007 Is this bulk buy well and truly closed or still alive, have some spare money that the Caps not getting. Quote
higgsti Posted November 7, 2007 Author Posted November 7, 2007 no its not closed untill my stuffs done Quote
Pilot Pete Posted November 7, 2007 Posted November 7, 2007 Woohoo, best get in on the action, I'll drop them an e-mail. Quote
rm163603 Posted November 12, 2007 Posted November 12, 2007 I've just heard that the genuine carbon moulded rear arch guards are now on the carbonmods site. This is what I've been waiting for since westfield stopped making theirs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.