carbon mods bulk buy

[lukeyboy]

We're working on a mould right now for a direct replacement of the OEM fake carbon abs stone chip guards but this will be in conventional carbon fibre not the fancy rubbery stuff we sell at the moment as stone chip guards because that can't be moulded in the same way. This means you can have a fully moulded real carbon set (but that will be susceptable to stone chips!) or flat guards that won't.

Any chance you can do the same for the cycle wings?

[higgsti]

the cannards fitted to the nose cone are large they have been fitted so that they follow the same angle as the nose cone .wether this angle is right or wrong i dont know for aero purposes

the way ive positioned them there is space for one above

[daverobs]

I would like to register an interest in wide bodied:

Dash with ears - will it pass the SVA?

Rear wing protectors

Boot lid covering.

Thanks

Dave Roberts

[davew]

Hi

Put me down for a wide body dash

thanks

[COREdevelopments]

im up for the dash with ears for a locost as i dont have a westfield . how long am i looking at? if it too long i may just go for the normal one.

rob

[higgsti]

matt and paul came round this morning to try some csr wings against my car i need the narrower ones because im running 185 tyres which theyre making soon .they brought a set of cannards so we doubled them up and here are pics .theres a new item on there too .and following todays talks theres some more new ideas on the way

[nikpro]

I would like some aero front wings (road resist) to fit a 205 x 15 tyre width and a boot panel (Wide body) - how long will it take for the 205 width wings and could you please PM me for any payment details,

Thanks

[higgsti]

i think the wings to fit 205 are ready its the 185s that arnt

[JeffC]

am going to give the cannards a miss, going to try and make a front spolier somehow    

will give a call in"t morn will take a pair of front wings if they are available  

[Barry Ashcroft]

This is what you want Jeff

[CarbonMods]

Hi Barry, Nice  ,

The rear diffuser we're looking into (so many people make their own we're seeing if we can come up with a universal or adaptable pre-fabricated one).

The front splitter is interesting, I've not seen that before (though we make them for road cars like Evos and Subarus).

We've also developed a carbon body for those Dominator lights you've got.  You can't go having all that carbon and then metal light bodies!!

We've got the ally dash with ears now as a template and it's much simpler than I thought so we should have that in production pretty soon.

Oh, and yes, our current Aero cycle wings are right for 205's, it's 185 tyres that will need a narrower wing (which should be ready within a week).

--Matt

[JeffC]

yep that or this one looks like it work very well

[Buzz Billsberry]

I Think that Dereks front wing was the orginal off Mark Smiths car which Richard Carroll now runs cos' Richard has  now got a  front wing similar to Austens (R5WST) in the picture before(which is similar to what Rob Navin used to run) if its any help!

Buzz

[Buzz Billsberry]

I tell a lie Richard Carrolls is different to Austen's

Sorry about the picky Richard its the suspension bolt snapping incident at Harewood

Buzz

[Richard]

Sorry about the picky Richard its the suspension bolt snapping incident at Harewood

Buzz

No worries Buzz, yep I remember the incident well and its one I hope doesn't happen again!!