sammy Posted February 8, 2007 Posted February 8, 2007 the linkage between my twin 45s carbs , is hitting the inlet manifold . would it ok to chop this part of the manifold out so that the linkage will sit correctly our any other ideas Quote
scott beeland Posted February 8, 2007 Posted February 8, 2007 Can you turn the linkage upside down? Quote
sammy Posted February 8, 2007 Author Posted February 8, 2007 just had the car Rollin road ed today but the guy tried to change the linkage around but not enough room . he suggested cutting the manifold away but thought id check if it would be ok first Quote
Derby Allen Posted February 8, 2007 Posted February 8, 2007 Yep, my linkage is attached at the bottom of the carbs and when fitted fowled with the Cast web on the inlet manifold. simple hacksaw job with buffer disc to clean up and job sorted, this had no effect on the manifold so dont worry, if you want some pictures of before and after then drop me a line. steve Quote
Danny Posted February 8, 2007 Posted February 8, 2007 Sammy Mine has been cut down! Works really well. You wanna call round and have a look? Danny Quote
Derby Allen Posted February 8, 2007 Posted February 8, 2007 sammy, pictures sent, that's got to be worth a beer, it was b@@dy freezing in th garage. Quote
sammy Posted February 8, 2007 Author Posted February 8, 2007 any pic's danny still freezing after today Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.