Jump to content

Recommended Posts

Posted

Dear All,

Just judging interest for now. Please shout loud if you are up for this?

We are making noises at work to run a suspension setup day & play day sprint course on an airfield in Essex. It's currently in the planning stages & will likely take place in January 2007 before the sprint season starts. If it gets the go ahead the WSCC will be the first ones to get invited.

The deal is:

Sat / Sun i.e. a weekend (one day) use of the far end of a 2 mile runway with a course of cones / natural curves on access roads set up as a sprint course.

Use of suspension set up equipment to include corner weights / laser suspension alignment / vehicle hoist in a workshop undercover & nearby to the runway.

After setup people can try their changes on the sprint course / come back make more changes / go out & repeat the excercise.

Possible use of Racelogic Vboxes for timing / data measurement for the techies amongst you but no "official" timing will take place.

Possible use of the on site canteen at lunch time.

Cost estimated at £20 - £30 per person but there may even be no charge depending on how many "outsiders" are interested.

Note I've been here myself & can confirm it is a good place to do some testing, vast expanses of concrete & tarmac & nothing but grass run off.

Please indicate your interest & confirm with a PM?

Cheers

Graham :D

Posted

Cant believe nobody has replied to this offer yet Windy.

Sound like a top do to me.

Essex is way too far for me to travel to make it viable, but im suprised those darn Sarf haven taken this up...yet.

Mark :bangshead:  :t-up:

Posted

QUOTE
will likely take place in January 2007

Possibly tooo cold for the folks darn sarf  :D  :D  :D  :devil:  :devil:  :devil:  :devil:  :devil:  :D  :D  :D

go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on go on ................ you know you wanna  :D  :devil:  :D

Posted

Reason for weekend in January is that this is the only time the venue isn't going to be used by the gliding club. They usually have sole use of the airfield at weekends you see.

I'm sure there'll be plenty of hot drinks & a warm workshop to warm up the wimps amongst us. Anyway I thought Essex was the coldest part of the UK during the winter. Us hardy southerners are used to it :p  :D

Posted

QUOTE
Anyway I thought Essex was the coldest part of the UK during the winter.

Don't believe all the hype Graham  :D  :D  ;)  ;)  :D

Hope you get a good turn-out sounds like a crackin day  ;)  :D  ;)

Posted

Windy,

I'd be up for this one, being in Essex does have some benefits you know.

I'm sure there will be plenty of comments on the other benefits - lol

Will also put this on the Essex forum with a link to this post - ok?

PM Sent

Tigger

Posted

I'm interested in this too, but i haven't got the first clue about operating the setup equipment... will there be an operator to assist or is it all left to us to operate?

I'm just a bit worried that i'll end up taking far too much time with the equipment if i'm left to figure it out myself.

Tim

Posted

I could be up for this.  Had my alignment laser set when I built the car last year but not had a chance to use some corner weights yet.  (yes I know Essex area has some Paul)

Jeremy

Posted
Windy,

I'd be up for this one, being in Essex does have some benefits you know.

I'm sure there will be plenty of comments on the other benefits - lol

Will also put this on the Essex forum with a link to this post - ok?

PM Sent

Tigger

Yes Tigger sounds like a good idea. Bare in mind that this post is to judge interest & nothing is set in stone yet so it's not an official invitation to attend. :)

Posted
I'm interested in this too, but i haven't got the first clue about operating the setup equipment... will there be an operator to assist or is it all left to us to operate?

I'm just a bit worried that i'll end up taking far too much time with the equipment if i'm left to figure it out myself.

Tim

Not a problem to be a novice, there will be some experienced people to set up the equipment for you & help with any adjustments.

Posted

Windy,

Could well be up for this if i get my trailer covering done in time - keep me posted...

Dave O.

Posted

Yes Tigger sounds like a good idea. Bare in mind that this post is to judge interest & nothing is set in stone yet so it's not an official invitation to attend.

Yeah, sorry Windy, got a bit carried away there - <!--emo&:D

I do understand and a link to this post has been added on our forum so anybody can read that is is just a "Gauge of interest"

Tigger

Posted
I'm interested in this too, but i haven't got the first clue about operating the setup equipment... will there be an operator to assist or is it all left to us to operate?

I'm just a bit worried that i'll end up taking far too much time with the equipment if i'm left to figure it out myself.

Tim

Not a problem to be a novice, there will be some experienced people to set up the equipment for you & help with any adjustments.

Good stuff... i'll definately be up for that then.

PM over to you today

Cheers

Tim

Posted
can't set suspension up in the snow!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.