Strip and Rebuild of a Duratec

[dibbly]

Hi

I'm going to start stripping my engine soon and was wondering if anyone can recommend a good manual for this and the eventual re-build. I've noticed Haynes do a manual for the Mk3 Mondeo. Is this sufficient are are there better sources out there?

Cheers

[simonbell]

The Haynes manual isn`t bad although it is a little bit patchy in places. Ford don`t repair the bottom end so some torqwue figures etc are missing for things like main crank ladder bolts.

Anyway the torque settings for these are supplied with the bolts when you order them for ARP  

I`ve got some pics of my rebuild on my website www.simon-bell.co.uk

Simon

[Westfieldman]

I have a paper copy of the FORD cd rom for the engine

Some time ago I sent a copy to a Caterham owner in the middle East and is posted on his web site

If I can copy the manual on works photo coppier I can post you and any one else that want one

[nre]

Some time ago I sent a copy to a Caterham owner in the middle East and is posted on his web site

HERE at the bottom of the page...

Neil

[Nick A]

Link doesn't work ?

(edited - found original page in google and that doesn't work either, so may not be a link problem - will try again later)

Nick

[dibbly]

Thanks for your help everyone, I'll print it out later.

[Cam]

If I can copy the manual on works photo coppier I can post you and any one else that want one

Hi Paul

Did you get my PM?

Cheers

Cam

[Westfieldman]

Yes

and yes when I get time/chance are you doing the C2C

[Cam]

Thanks Paul

Yep, doing C2C will see you there!

[CedricTheBrave]

I have a PDF of the Ford 543 manual for the Duratec it is about 48mb if you want it

but it is the best manual you can possibly get for this engine

[simonbell]

DWilkes

I`d be interested in a copy of the manual you have. Wwhats the best way to get it......can I download from your www / ftp site if you have one or would you prefer I sent you a blank CD?

Simon

[CedricTheBrave]

email/pm me and I will send you a link to download it