zetec crank torque settings?

[congorobot]

Does anyone know the torque settings for the crank bearing cap bolts?

[Gavin]

This is direct from the Ford TIS

The crankshaft must turn freely, if necessary check and adjust the bearing clearances.

Tighten the main bearings and the big-end bearings.

1 Tighten the main bearing cap bolts to 83 Nm.

2 Tighten the big-end bearing bolts in two stages.

l Stage 1: 15 Nm

l Stage 2: 90 degrees

 

If you need any other settings or info let me know.

[congorobot]

Cheers Gavin.