dibbly Posted April 6, 2006 Share Posted April 6, 2006 I've got outer drive flanges off a 4x4 sierra that was originally fitted with ABS. These have the toothed ring on them for the wheel speed sensors. Does anyone know if these give any problems for fitment to the upright as the ones that Westfield supply don't have them. Cheers Quote Link to comment Share on other sites More sharing options...
Peter M Posted April 6, 2006 Share Posted April 6, 2006 As far as know with the abs rings they will not go into the westfield supplied uprights.Could always try and remove them. Quote Link to comment Share on other sites More sharing options...
Steve20 Posted April 7, 2006 Share Posted April 7, 2006 If you are building an SDV then I don't think you will have a problem Steve Quote Link to comment Share on other sites More sharing options...
Peter M Posted April 7, 2006 Share Posted April 7, 2006 Previous post. clicky Looks like he's building a SEI Quote Link to comment Share on other sites More sharing options...
jeff oakley Posted April 7, 2006 Share Posted April 7, 2006 If it is a sierra rear set up ie diff as well then it will fit okay. Both previous cars I built had the outer stub axle from a 4x4 with the ABS ring. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.