robsawyer Posted July 19, 2005 Share Posted July 19, 2005 Hi How easy is it to inspect/repack or replace a rear wheel bearing on a factory Megabusa? The car has Westifield alloy hubs and each has a very large lock nut holding the hub on. Do I assume the brakes disc needs to be removed also? Can the lock nut be reused? or is it best to buy a new set from Westfield? (or other?) Also what's the torque setting for the nut? Where can I get new bearings from? are they standard Ford ones? or do I get them from Westfield? Finally is any special grease needed for the bearings? Thanks in advance Rob Quote Link to comment Share on other sites More sharing options...
S8ight Posted July 19, 2005 Share Posted July 19, 2005 REAR W.B. QWB 422 £19.50 (SKF-633295B) its a sealed bearing and will come with a new nut you need to take the upright off to press the bearing out Quote Link to comment Share on other sites More sharing options...
robsawyer Posted July 21, 2005 Author Share Posted July 21, 2005 Thanks for the info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.