Tucka Posted June 27, 2005 Share Posted June 27, 2005 Just putting the reversing light and fog light on the body. Anyone got any suggestions on how to line the two lamps up so they are as straight as possible with each other? I've tried to use a line between the two tail lights but it's not very accurate. Thanks Quote Link to comment Share on other sites More sharing options...
Ted Posted June 27, 2005 Share Posted June 27, 2005 I used measurements from the floor to the main light cluster fixing holes to get the height correct then using a length of 3x2 and a spirit level I marked a straight line across the back of car. TED Quote Link to comment Share on other sites More sharing options...
deano.1 Posted June 27, 2005 Share Posted June 27, 2005 I ran some masking tape across from one rear light fitting to the other and took measurements from this! Quote Link to comment Share on other sites More sharing options...
emma.1 Posted June 27, 2005 Share Posted June 27, 2005 Quite funny for you to commenting on reverse lights Dean...........well I suppose we do use it a lot!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.