Ted Posted June 11, 2005 Share Posted June 11, 2005 I am just wiring in the dashboard and have a couple of real beginner questions: 1. Does it matter which spade connector on the back of the headlamp, fan, w/screen washer etc switches the earth and illumination feed wires connect to? 2. Same as Q1 but for the dashboard warning lights and instrument illumination bulbs? Thanks TED Quote Link to comment Share on other sites More sharing options...
deano.1 Posted June 11, 2005 Share Posted June 11, 2005 No it doesn't, either way round will be ok! Quote Link to comment Share on other sites More sharing options...
Ted Posted June 11, 2005 Author Share Posted June 11, 2005 Cheers, Here goes then. TED Quote Link to comment Share on other sites More sharing options...
deano.1 Posted June 11, 2005 Share Posted June 11, 2005 BANG Quote Link to comment Share on other sites More sharing options...
Ted Posted June 11, 2005 Author Share Posted June 11, 2005 Just connected the battery, and still standing with the car in one piece. TED Quote Link to comment Share on other sites More sharing options...
KerryS Posted June 11, 2005 Share Posted June 11, 2005 You might have to fiddle around with the main/dip switch connectors to get correct operation of headlamps as there are three terminals. When I first connected my battery I very gingerly dobbed the connector on and there was a spark. Bit of checking showed the hazard switch was "on" and spark was all four winkers taking current. Phew! Worry mode off Kerry S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.